BLATEK超聲探頭TBO TRAN40NHZ 2.2*1.8MM 2M CBL產品簡介
B掃描傳感器可以創建二維橫截面視圖。B掃描探針使用相同的高級生物相容材料構建，并遵循規定的工藝，程序和測試規則。客戶可以選擇他們的頻率和人體工程學，Blatek提供最佳匹配的壓電復合材料堆棧。
Our B-scan transducers are built to create two-dimensional, cross section views. B-scan probes are constructed with the same high grade bio-compatible materials and follow the rules of regimented processes, procedures, and testing. Customers can choose their frequency and ergonomics with Blatek providing the optimum matched piezocomposite stack.
BLATEK其他產品簡介
醫療設備
A掃描傳感器
A掃描探針是最基本的超聲波模式之一，也是更復雜的超聲成像和檢查方法的出發點。Blatek提供優質的A掃描傳感器，頻率范圍為10MHz至20Mhz，采用精細調制的壓電復合材料制成，并且具有首屈一指的最佳優化。Blatek制造的A掃描探頭在換能器表面的中心有一個固定光，用于與視軸對齊。Blatek制造的每個傳感器都是由ECN控制下的文件清單，程序和測試構建的。
多普勒換能器
多普勒效應是這樣的：如果聲源朝向聽音裝置移動，則波長被壓縮并且音調增加。當聲源遠離聽音裝置時，情況正好相反。該場景用于超聲系統中用于血流的可視化和測量。Blatek可以滿足配置和要求中的CW多普勒需求。目前，Blatek的所有多普勒換能器均采用專有的壓電復合材料制造，以實現最佳靈敏度。
測厚儀
Pachymetry源自希臘語pachy意為“厚”和metron指示“測量”。這種一維形式的A掃描探針用于精確測量眼睛的厚度和眼睛內部的厚度。Blatek繼續成為Pachymetry探針的全球領導者。憑借生物相容材料和最先進的陶瓷，這些經過時間考驗的設計繼續為厚度測量市場提供食物和印象。從10MHz和50MHz開始的頻率提供了精確和準確測量所需的必要分辨率?？讖叫∮?mm的孔徑通常是客戶選擇的封裝電纜和連接器。
工業設備
聲學堆棧
Blatek提供定制設計的聲學堆疊，放置在自己的外殼中。無論是單元件，雙元件還是多元件陣列，工程師都會提供一種聲學“三明治”，包括壓電復合材料和背襯，面層可滿足要求。多元件組件可包括端接到選擇的連接器的柔性電路。
接觸傳感器
這些堅固的不銹鋼外殼縱波傳感器的標準尺寸范圍為.250“至1.00”有源元件直徑。所有尺寸均采用優化的壓電復合材料，通過氧化鋁耐磨板提供最大的靈敏度和出色的帶寬。這種高度工程化的復合元件還可在業務中提供最佳的信噪比。標準頻率范圍為1.00MHz，2.25MHz，3.50MHz，5.00MHz和10.0MHz，可提供直角BNC或直角UHF標準連接器?？梢允褂闷渌B接器，也可以進行頂部安裝連接。
角度傳感器
Blatek生產的積分角度光束傳感器在工業市場上表現出色?！巴笆健奔羟胁ǎ环N帶有頂部安裝連接器的不銹鋼罐，具有更高的靈敏度和高信噪比，比競爭對手高出10dB。這種卓越的優化是通過使用專有的單層或雙層匹配層到楔組合來實現的。固定角度傳感器的標準頻率范圍是2.25MHz到10.0MHz。可以剪切或縱向的角度可以設計為精確的BIP到鼻子長度，以滿足檢查標準。BNC，UHF，
壓電復合
任何傳感器的心跳來自壓電晶體，壓電晶體是在總裁兼首席科學家薛學庚博士的指導下在工廠設計，開發和制造的。在產品中開發和使用的1-3壓電復合材料也可供客戶購買并放置在自己的傳感器外殼或夾具中。目前使用的頻率從125KHz的低頻開始，并攀升到20MHz的高頻。
Medical Devices
A-Scan Transducers
A-scan probes are one of the most fundamental ultrasonic modalities and the starting point for more complex methods of ultrasonic imaging and examination. Blatek provides premium quality A-scan transducers in a frequency range of 10MHz to 20Mhz made with finely tuned piezo-composite material and a maximized optimization second to none. We manufacture A-scan probes that have a fixation light in the center of the transducer face for alignment with the visual axis. Every transducer we manufacture is built with documented bills of materials, procedures, and testing that is under ECN control.
Doppler Transducers
The Doppler Effect is this: if the sound source is moving toward the listening device, the wavelength is compressed and the pitch increased. The opposite is true when that sound source moves away from the listening device. This scenario is used in ultrasonic systems for visualization and measurement of blood flow. Blatek can tackle your CW Doppler needs in your configuration and requirements. Currently, all Doppler transducers at Blatek are constructed using our proprietary piezo-composite for the best sensitivity possible.
Pachymetry
Pachymetry is derived from the Greek pachy meaning “thick” and metron indicating “measure”. This one dimensional form of A-scan probe is used to accurately measure thickness of and within the eye. Blatek continues to be a world wide leader in Pachymetry probes. With bio-compatible materials and state-of-the-art ceramics, these time tested designs continue to feed and impress the pachymetry market. Frequencies starting at 10MHz and 50MHz provide the necessary resolution needed for precise and accurate measurement. Apertures less than 2mm are typical with potted cables and connectors of the customers’ choice.
Medical Probes
Array Transducers
A-Scan
B-Scan
Doppler - CW & PW
HIFU
Ophthalmic
MEDICAL PROBES BROCHURE:
Medical Brochure
Industrial Devices
Acoustic Stacks
Blatek provides custom-designed acoustic stacks to place in your own housings. Whether it be a single, dual, or multi-element array, our engineers provide an acoustic “sandwich” comprised of piezocomposite and backing with face layers that match your requirements. Multi-element assemblies can include flex circuitry terminated to a connector of your choice.
Contact Transducers
These rugged stainless steel cased longitudinal wave transducers range in standard size from .250” up to 1.00” active element diameter. All sizes incorporate an optimized piezo-composite that provides maximum sensitivity and exceptional bandwidth through an alumina oxide wearplate. This highly engineered composite element also provides the best signal-to-noise ratio in the business. Our standard frequency ranges are 1.00MHz, 2.25MHz, 3.50MHz, 5.00MHz, and 10.0MHz, available with right angle BNC or right angle UHF standard connectors. Other connectors are available and top mount connections are possible.
Angle Beam Transducers
Blatek produces integral angle beam transducers that have shown superior performance in the industrial market. Our “barrel style” shearwave, a stainless steel can with a top mount connector, has greater sensitivity and a high signal-to-noise ratio that betters the competition by as much as 10dB. This superior optimization is accomplished by using our proprietary single or double matching layer-to-wedge combination. The standard frequency range of our fixed angle transducers is 2.25MHz to 10.0MHz. The angles, which can be shear or longitudinal, can be engineered for a precise BIP-to-nose length to meet your inspection criteria. BNC, UHF, or LEMO style connectors are available and come in a top mount location or right angle position.
Piezo-Composite
The heartbeat of any transducer comes from the piezo-electric crystal, which is engineered, developed, and manufactured in our facility under the guidance of our President and Chief Scientist, Dr. Xuecang Geng. The 1-3 piezo-composite that we develop and use in our products is also available for customers to purchase and place in their own transducer case or fixture. Frequencies that we currently work with start at a low of 125KHz and climb to a high of 20MHz.
BLATEK超聲探頭TBO TRAN40NHZ 2.2*1.8MM 2M CBL
愛澤工業(IZE INDUSTRIES)特價經銷、常用備件BLATEK超聲探頭CINDY系列部分型號：
BLATEK超聲探頭AT23730 TRAN40NHZ 0.6*0.5MM 2M CBL
BLATEK超聲探頭TBO TRAN40NHZ 2.2*1.8MM 2M CBL
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于BLATEK超聲探頭TBO TRAN40NHZ 2.2*1.8MM 2M CBL的疑問，請隨時與我們聯系（021-31006702）。我們將盡全力解決您的問題。
有關BLATEK超聲探頭TBO TRAN40NHZ 2.2*1.8MM 2M CBL更詳細的信息或者購買BLATEK相關產品，請聯系愛澤工業。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
BLATEK超聲探頭TBO TRAN40NHZ 2.2*1.8MM 2M CBL產品簡介
