SENSOREX傳感器ODO8000產品介紹
SPECIFICATIONS | |
Measurement Principle | Optical measurement via luminescence |
Measurement Ranges | 0.00-20.00 mg/L |
Accuracy | ± 0.1 mg/L |
Response Time | 90% in less than 60 seconds |
Measurement Interval | > 5s |
Membrane Cap | Cross Sensitivity: Organic solvents (acetone, toluene, chloroform, methylene chloride); Chlorine gas No Cross Sensitivity: pH 1-14, H2 S, CO2 , SO2 |
Temperature Compensation | 10K NTC |
Temperature Accuracy | 0.5°C |
Sample Temperature | 0-50°C (32 to 122°F) |
Max Pressure | 5 bar (72.5 PSI) |
Signal Output | Direct MODBUS RS-485 |
Power Supply | 12 Volts (±1Volt) |
Power Consumption | 1 W |
Dimensions | Diameter: 25 mm (0.98 in) x Length 146 mm (5.75 in) |
Weight | 450g (1lb) for sensor + 3m (10ft) cable |
Material | 316 Stainless Steel(ODO8000), Titanium (ODO9000) |
Protection Rating | IP68 |
SENSOREX傳感器介紹
ODO8000 and ODO9000 - Lumin-S Optical Dissolved Oxygen Sensors with Digital Communication
Product Information
The Lumin-S optical dissolved oxygen sensor delivers reliable DO measurements over a long operating life. There are no membranes to replace, no electrolyte solutions to replenish, and no anodes to clean. Maintaining the sensor is as easy as replacing the optical sensing cap once every 1-2 years, and since all calibration data is stored on the cap, there’s no need to calibrate. This dissolved oxygen sensor outputs a Modbus/RS-485 digital signal for easy PLC integration.
Reliable measurements: Optical sensor technology delivers accurate DO monitoring with no drift and no minimum flow
Long operating life with minimal maintenance: No membranes, electrolyte solutions, or anodes – just replace the cap once every 1-2 years
No calibration: All calibration data is stored on the cap for quick and easy startup
Simple system integration: Use Modbus/RS-485 to integrate with a PLC or other control system
ODO8000 和 ODO9000 - 具有數字通信功能的 Lumin-S 光學溶解氧傳感器
產品信息
Lumin-S 光學溶解氧傳感器可在較長的使用壽命內提供可靠的DO測量。無需更換膜，無需補充電解質溶液，也無需清潔陽極。 維護傳感器就像每 1-2 年更換一次光學傳感帽一樣簡單，并且由于所有校準數據都存儲在帽上，因此無需校準。 該溶解氧傳感器輸出 Modbus/RS-485 數字信號，以便于 PLC 集成。
可靠的測量：光學傳感器技術可提供準確的溶解氧監測，無漂移且無最小流量
使用壽命長，維護最少：無需膜、電解質溶液或陽極 - 只需每 1-2 年更換一次蓋子
無需校準：所有校準數據都存儲在瓶蓋上，以便快速輕松地啟動
簡單的系統集成：使用Modbus/RS-485與PLC或其他控制系統集成
SENSOREX傳感器常見型號及訂貨號：
SENSOREX ODO8000
SENSOREX ODO9000
SENSOREX SENSOR NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于SENSOREX傳感器ODO8000的疑問，請隨時與我們電聯，（021-3100 6702），我們將盡全力解決您的問題。
If you have any question for SENSOREX products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
SENSOREX傳感器ODO8000介紹
