SYNTHO GLASS修補膠帶SG830產介紹
Item # | Roll Size |
SG205 | 2" x 5' (5.08cm x 1.524m) |
SG309 | 3" x 9' (7.62cm x 2.743m) |
SG415 | 4" x 15' (10.16cm x 4.572m) |
SG430 | 4" x 30' (10.16cm x 9.144m) |
SG450 | 4" x 50' (10.16cm x 15.24m) |
SG830 | 8" x 30' (20.32cm x 9.144m) |
SG850 | 8" x 50' (20.32cm x 15.24m) |
SYNTHO GLASS修補膠帶SG系列產品介紹
Syntho-Glass? is the originally, patented fiberglass pre-impregnated composite that is activated by salt or freshwater. Packaged in a hermetically sealed foil pouch, it is ready to use and does not require any measuring or mixing. This system, when used with the appropriate primary sealant, enables you to repair and reinforce virtually any diameter pipe in minutes.Syntho-Glass not only restores a pipe to its original psi rating, but actually can make the repair area stronger than the original pipe, reducing downtime, saving in parts and labor.With an initial cure time of only 30 minutes (75°F/24°C), Syntho-Glass is excellent on copper, steel, SS, PVC, FRP, clay, concrete, rubber, and more. It is safe to use, nontoxic, noncombustible, and odorless. Syntho-Glass is a versatile solution for industries where quickaction repair can be critical.
TYPICAL APPLICATIONS
? Impact protection
? Emergency repair
? Corroded pipes
? Irregular pipe fittings
? Force mains and gravity lines
? Joint and tee repair
? Underwater repair and splash zone
PHYSICAL PROPERTIES
VOCs: None
Working Time: 5 Minutes at 75°F (24°C)
Set Time: 30 Minutes at 75°F (24°C)
Resin Type: Water-activated polyurethane
Resin Application: Pre-impregnated
Service Temperature: -50° to 250°F (-45° to 121°C)
Application Temperature: 32° to 150°F (0° to 65°C)
Pressure once cured w/primary sealant: Max 300 psi (20.6 bar)
Syntho-Glass?是最初獲得專利的玻璃纖維預浸復合材料，可通過鹽或淡水活化。 包裝在密封的鋁箔袋中，可以隨時使用，不需要任何測量或混合。該系統與適當?shù)闹髅芊鈩┮黄鹗褂脮r(shí)，夠在幾分鐘內修復和加固幾乎任何直徑的管道。Syntho-Glass不僅可以將管道恢復到其原始psi等級，而且實際上可以使修復區域比原始管道更堅固 Syntho-Glass的初始固化時間僅為30分鐘（75°F / 24°C），在銅，鋼，不銹鋼，不銹鋼，聚氯乙烯，玻璃鋼，粘土，混凝土，橡膠上均表現出色和更多。使用安全，無毒，不可燃，無味。Syntho-Glass是快速修復至關重要的行業的通用解決方案。
典型應用
?沖擊防護
?緊急維修
?腐蝕管
?不規則管件
?力干線和重力線
?修理三通
?水下維修和飛濺區
物理性質
VOC：無
工作時間：在75°F（24°C）下5分鐘
設定時間：75°F（24°C）下30分鐘
樹脂類型：水活化聚氨酯
樹脂應用：預浸
工作溫度：-50°至250°F（-45°至121°C）
應用溫度：32°至150°F（0°至65°C）
一次密封固化后的壓力：最大300 psi（20.6 bar）
SYNTHO GLASS修補膠帶SG系列產品尺寸介紹
SYNTHO GLASS修補膠帶SG系列其他常見型號
SYNTHO GLASS SG205
SYNTHO GLASS SG309
SYNTHO GLASS SG415
SYNTHO GLASS SG430
SYNTHO GLASS SG450
SYNTHO GLASS SG830
SYNTHO GLASS SG850
SYNTHO GLASS Repair tape NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于SYNTHO GLASS修補膠帶SG830的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for SYNTHO GLASS products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
SYNTHO GLASS修補膠帶 SG830規格描述
