MOBIL潤滑油500系列產品介紹
Mobilarma 500（美孚拉瑪500 系列）潤滑油是優質性能產品，主要用作機器磨合或儲存時的潤滑油，它在機器的內表面上形成一層防銹膜。該產品尤其適合用作柴油和汽油發動機磨合潤滑油。潤滑油從金屬表面除去水分，并在金屬表面上形成牢固的防水膜以防止生銹和腐蝕。Mobilarma 500（美孚拉瑪500系列） 潤滑油吸收系統中的水分形成油包水乳液，從而讓機器的接觸面仍有滿意的潤滑效果。該產品具有很強的化學穩定性，抗磨和清凈性能，適合用作高質量的短期用潤滑油。
在大多數應用場合中，在機器加注潤滑油或液壓油并重新工作時，不需要沖洗掉殘留的防銹膜。但如果是以下情況，建議用加注的潤滑油沖洗掉 Mobilarma （美孚拉瑪）產品或其殘留油膜：
1.Mobilarma（美孚拉瑪）不能提供需要的潤滑特性來滿足在額定負荷和溫度下運轉的機器。
2.設備排放油品困難，且不易清除 大量低凹處的Mobilarma（美孚拉瑪）。
3.Mobilarma（美孚拉瑪） 產生的對系統潤滑油的污染可能降低潤滑性能（例如：Mobilarma（美孚拉瑪） 可能增加壓縮機中的氟里昂濁點或在高壓液壓系統中油包水乳液降低抗磨特性）
4.防銹劑的存在降低了在渦輪和類似設備中的新油的分水能力。
應用范圍
發動機和工業設備的磨合和閑置用潤滑油
長期停用的渦輪機
有水分出現且形成的乳液不會影響操作的液壓系統
測試校準油
Mobilarma 500 is a premium performance product used primarily as a lubricant for machine wear or storage. It forms a rust preventive film on the inside surface of the machine. This product is especially suitable for use as a running-in lubricant for diesel and gasoline engines. Lubricating oil removes moisture from the metal surface and forms a strong waterproofing membrane on the metal surface to prevent rust and corrosion. Mobilarma 500 (Mobil Rama 500 Series) Lubricating oil absorbs water from the system to form a water-in-oil emulsion, so that the machine's contact surface still has satisfactory lubrication. This product has strong chemical stability, anti-wear and detergency properties and is suitable for use as a high quality short-term lubricant.
In most applications, it is not necessary to rinse off the residual rust film when the machine is filled with lubricating oil or hydraulic oil and is working again. However, it is recommended to rinse off the Mobilarma product or its residual oil film with the added lubricant if:
1. Mobilarma does not provide the required lubrication characteristics to meet the machine operating at rated load and temperature.
2. It is difficult for the equipment to discharge oil, and it is not easy to remove a large number of low-pitched Mobilarma.
3. Mobilarma's contamination of system lubricants may reduce lubrication performance (eg Mobilarma may increase the Freon cloud point in the compressor or reduce the resistance of the water-in-oil emulsion in high pressure hydraulic systems) Grinding characteristics)
4. The presence of rust inhibitors reduces the water separation capacity of new oils in turbines and similar equipment.
Application range
Running-in and idle lubricants for engines and industrial equipment
Long-term deactivated turbine
The presence of moisture and the formation of an emulsion does not affect the hydraulic system of operation
Test calibration oil
MOBIL潤滑油500系列特點與優點
Mobilarma 500（美孚拉瑪 500系列）是具備防銹能力的出色潤滑油。這樣就可以安全放置那些現在不使用，但將來可能間歇在低中負荷下短期運行的設備。這些產品具備出色的防銹性能，可以減少會在閑置設備出現的任何可能的損壞。這樣就能節省在設備重新投入工作前的清潔和可能的嚴格沖洗程序。
特性 | 優點及潛在效益 |
卓越的防銹與抗腐蝕保護 | 在季節性閑置期間有出色的防銹性能 |
有效的抗磨性能 | 防止設備磨損 |
雙用途潤滑油/防銹本性 | 減少磨合、測試或調整過程中的成本和時間 |
The Mobilarma 500 Series oils provide an excellent lubricant that also acts as a rust preventive. This allows safe lay-up of equipment that will not be used immediately but may be operated intermittently at low to moderate loads for short periods of time. These products provide excellent rust preventive performance reducing any potential damage that could otherwise occur in non-operating equipment. This saves clean-up and potential rigorous flushing procedures prior to placing the equipment back in service.
Features | Advantages and Potential Benefits |
Excellent Rust and Corrosion Protection | High level protection against rust during seasonal lay-ups Reduced clean-up time required to place equipment back into production Displaces water from metal surfaces and form tenacious protective films |
Effective Anti-Wear Properties | Protects equipment against wear |
Dual Purpose Lubricant/Rust-Preventive Nature | Reduced costs and time for run-in, testing or adjustment procedures Eliminates unnecessary flushing and draining steps |
MOBIL潤滑油500系列技術資料
Mobilarma 500（美孚拉瑪500 系列） | 522 | 524 |
粘度， ASTM D 445 | ||
cSt @ 40o C | 28.8 | 88.4 |
cSt @ 100o C | 5.0 | 10.5 |
粘度指數，ASTM D 2270 | 95 | 95 |
傾點，oC，ASTM D 97，最大 | -24 | -18 |
閃點， oC，ASTM D 92，最小 | 182 | 218 |
密度@ 15.6o C，計算值，鎊/加侖 | 7.3 | 7.36 |
Mobilarma 500 Series | 522 | 524 |
Viscosity, ASTM D 445 | ||
cSt @ 40o C | 28.8 | 88.4 |
cSt @ 100o C | 5.0 | 10.5 |
Viscosity Index, ASTM D 2270 | 95 | 95 |
Pour Point, oC, ASTM D 97, max | -24 | -18 |
Flash Point, oC, ASTM D 92, min | 182 | 218 |
Density @ 15.6o C, Calculated, lbs/gal | 7.3 | 7.36 |
MOBIL潤滑油500系列 示例533
愛澤工業(IZE INDUSTRIES)特價經銷、常用備件MOBIL潤滑油500系列 示例533部分型號：
MOBIL潤滑油533
MOBIL潤滑油522
MOBIL潤滑油524
MOBIL潤滑油525
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于MOBIL潤滑油500系列 示例533的疑問，請隨時與我們聯系（021-31006702）。我們將盡全力解決您的問題。
有關MOBIL潤滑油500系列 示例533更詳細的信息或者購買MOBIL相關產品，請聯系愛澤工業。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
MOBIL潤滑油500系列介紹及特點優點
