亚洲日韩精品无码一区二区三区,日韩精品无码一区二区三区久久久 ,国产高清乱理伦片中文,无码精品久久久天天影视

DESCO電源適配器19652產品介紹

Features

Single Workstation Continuous Monitor

Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface

IMPROVED Operator Alarm

Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent

NEW Mat Monitor Switch

Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface

NEW Audible Alarm Adjustment

Sets the audible alarm volume from loud to louder

NEW 19653 Remote Alarm Accessory

Connect to the Multi-Mount Monitor and place in the operator’s field of view to alert operator of alarms

Desco Wave Distortion Technology

Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor

Park Snap

Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm

Single-Wire Impedance Design

Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0

1.2 Volt Operator Test Voltage

Reduces the risk of electrical overstress (EOS) for the handling of sensitive components

<50 Millisecond Alarm Response Time

Identifies failures and intermittencies that inferior technologies miss

Continuous Visual and Audible Alarms

Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs

Calibration Verification

Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations

NIST Calibrated with Certificate Included

Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.

100-240VAC Power Adapter with IEC C14 Style Inlet

Connects to a power cord with a IEC C13 outlet connector

Made in the United States of America

This item is made and stocked in Chino, CA

*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.

特征

單工作站連續監控

持續監控一名操作員和一個 ESD 工作臺面的接地路徑完整性

改進的操作員警報

當操作員無意中斷開與顯示器的連接或香蕉插頭與顯示器插孔之間的連接斷斷續續時發出警報

新的墊子監視器開關

在沒有 ESD 工作臺面的區域使用時禁用工作臺面監控電路

新的聲音警報調整

將聲音警報音量從大到大

全新 19653 遠程報警配件

連接到 Multi-Mount Monitor 并放置在操作員的視野中以提醒操作員警報

Desco 波形失真技術

對腕帶的接地路徑*及其 1 兆歐安全電阻的存在提供穩定的連續監測（相對于脈沖或間歇）

公園快照

允許操作員在離開工作站時斷開（并停放）腕帶，而不會產生誤報

單線阻抗設計

符合 ANSI/ESD S20.20，符合 ESD TR1.0-01-0

1.2 伏操作員測試電壓

降低處理敏感組件時的電氣過載 (EOS) 風險

<50 毫秒的警報響應時間

識別劣質技術遺漏的故障和間歇性

連續視覺和聽覺警報

亮綠燈表示正確接地；發生斷斷續續或連接失敗時亮紅色并發出聲音警報

校準驗證

使用 Desco 98221 Wave Distortion Monitor 驗證測試儀來檢查 Wave Distortion Monitor 的測試限制，而無需將其從工作站中移除

NIST 校準，包括證書

使用可追溯至美國國家標準與技術研究院的公認程序和標準進行校準。有關 Desco 產品校準的更多信息，請參閱校準。

100-240VAC 電源適配器，帶 IEC C14 樣式入口

使用 IEC C13 插座連接器連接到電源線

美國制造

這個項目是在加利福尼亞州奇諾制造和儲存的

*ESDA 腕帶標準為 ANSI/ESD S1.1。根據 ANSI/ESD S20.20 表 3，腕帶系統所需的限制為 0.8 至 1.2 x 106 歐姆，產品資格測試符合 ANSI/ESD S1.1。被監測電路的測試范圍為 500 千歐至 10 兆歐。

DESCO電源適配器19652其他型號列舉：

DESCO 19651

DESCO 19652

DESCO 19653

DESCO 19258

DESCO 19260

DESCO 19264

DESCO 98221

DESCO Power Adapter NEW + ORIGINAL+ ONE YEAR WARRANTY

愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。

如果有任何關于DESCO電源適配器19652的疑問，請隨時與我們電聯，（021-3100 6702），我們將盡全力解決您的問題。

If you have any question for DESCO products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.

DESCO電源適配器19652產品介紹