MESSKONZEPT熱探測器FTC110-OEM技術參數
Technical Data | |
Absolute maximum ratings: | |
Ambient temperature | -20 ~ +55 °C |
Sensor temperature | +60 °C (max. +75 °C) |
Gas pressure (absolute) | 1 bar (0.4~10 bar) |
Specifications: | |
Weight | ~200 g |
Gas flow | 50 l/h (20~150 l/h) |
T90 time at a flow of 50 l/h | <1 sec |
Volume of the device | ~1.5 cm3 |
Warm-up time | ~20 min |
Material: | |
Material exposed to the gas | Stainless steel (LF316SS), Kovar, Si, SiOxNy, gold, epoxy, Viton |
MESSKONZEPT熱探測器FTC110系列介紹
FTC110 探測器基于帶有薄膜的微機械硅芯片。兩個薄膜電阻集成在薄膜中,用于加熱薄膜和檢測其溫度。兩個電阻均受惰性涂層保護,以防止與氣體分子發生化學反應。在薄膜的上方和下方,硅片上蝕刻有兩個空腔。測量氣體擴散到空腔中,根據氣體的熱導率,從薄膜(源)中耗散的能量或多或少高于其余芯片(空心)。測量量是將薄膜溫度保持在較高水平所需的電壓。
微機械芯片安裝在測量氣體流過的不銹鋼外殼中。氣體入口和出口由 6mm Swagelok? 配件制成。為了允許探測器實現溫度控制操作模式,使用連接到外殼的兩個加熱元件和一個溫度傳感器來控制不銹鋼外殼的溫度。溫度控制電路位于安裝在外殼下方的第一塊電路板上。溫度可用 10 圈電位器設定。默認值為 60°C。在外殼上方,第二塊電路板控制膜的溫度(~105°C)并生成輸出信號。
The FTC110 detector is based on a micro-mechanical silicon chip with a thin membrane. Two thin film resistors are integrated into the membrane and are used for both heating the membrane and detecting its temperature. Both resistors are protected by an inert coating in order to prevent chemical reactions with the gas molecules. Above and underneath the membrane, two cavities are etched into the silicon. The measuring gas diffuses into the cavities and depending on the thermal conductivity of the gas more or less energy is dissipated from the membrane (source) which is held at a higher temperature than the remaining chip (hollow). The quantity measured is the voltage that is needed to keep the temperature of the membrane at the higher level.
The micro-mechanical chip is fitted into a stainless steel housing where the measuring gas flows through. Gas inlet and outlet are made of 6mm Swagelok? fittings. In order to allow a temperature controlled operation mode of the detector, the temperature of the stainless steel housing is controlled using two heating elements and a temperature sensor that are attached to the housing. The temperature control circuit is on a first board mounted underneath the housing. The temperature may be set with a 10-turn potentiometer. The default value is 60°C. Above the housing, a second board controls the temperature of the membrane (~105°C) and generates the output signal.
MESSKONZEPT熱探測器FTC系列其他常用型號:
MESSKONZEPT FTC110-TRA
MESSKONZEPT FTC110-OEM
MESSKONZEPT FTC200-OEM
MESSKONZEPT FTC130-OEM
MESSKONZEPT FAST THERMAL CONDUCTIVITY DETECTOR NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年,定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣,液壓以及氣動解決方案的合作伙伴,我們利用我們的全球協作團隊,為客戶提供先進解決方案,市場知識以及相關增值服務來幫助優化客戶的工作效率,提高可靠性和安全性,致力于成為工業產品和解決方案的優質渠道。
如果有任何關于MESSKONZEPT熱探測器FTC110-OEM的疑問,請隨時與我們溝通(021-31006702)。我們將盡全力解決您的問題。
If you have any question for MESSKONZEPT products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
MESSKONZEPT熱探測器FTC110-OEM技術參數及介紹
納分析儀
熱切換儀丨熱分析儀
諧波分析儀
PH計丨PH(ORP) (REDOX)傳感器丨ORP測定儀
表面/界面性能測定儀
測厚儀
測量計量?jī)x器
尺寸檢測儀
充電板監測器
磁導率測試儀
磁通計丨高斯計
電導率分析儀
電工儀器儀表
電化學分析儀器
噸位監測儀
二氧化硅分析儀丨硅表
反射率儀丨反射計丨折光計丨折光率儀
光譜分析儀
光學儀器
函數信號發生器
環境監測儀器
混凝土測定儀
檢漏儀
靜電檢測裝置
雷達發生器
粒度丨顆粒丨粉末分析儀器及配件
粒子計數器丨粒子收集器
流量?jī)x表
露點儀
螺紋檢測儀
濃度檢測儀
其他分析儀配件
氣體分析儀丨氣體檢測儀丨氣體探測儀
氣相色譜儀丨配件
去離子單元
燃燒測定儀丨燃燒分析儀
色譜分析儀
示波器
數據記錄儀丨圖形記錄器
水分測定儀丨配件
水質分析儀
探針/探針配套
溫度儀表丨測溫儀表
無損檢測丨探傷儀器
物位/液位儀表
顯示儀表
校驗儀表
校驗裝置及儀表
行業專用儀器
壓力儀表
鹽度分析儀
氧分析儀(純水)
元素分析儀器
質譜分析儀
濁度計