GE傳感器RS-FS-9009系列技術參數
Mechanical | |
Hot End Pipe Union: | 300 Series Stainless Steel |
Hot and Cool End Housings: | 300 Series Stainless Steel |
Hot End Mount: | 3/4” NPT female, 2-1/4" Union Nut |
Cool End Mount: | 2-1/2” Pipe Clamp for 1-5/8” Strut Channel |
Connectors: | |
Cool End to Interconnecting Cable: | MIL-DTL-38999 Series III size 15 (5 pin) |
Sensor: | Silicon Carbide photodiode |
Window: | Sapphire |
Operating | |
Sensitivity: | >5 mA @ 1x1010 photons/in2 /sec @ 310 nm |
Output: | Operating: 4 - 20 mA, Max < 21 mA |
Response time: | <175 milliseconds |
Power Requirements: | |
Cool End: | 12 - 30 VDC @ > 100 mA |
Interconnecting Cable: | Max voltage 300 Vrms |
Temperature Range: | |
Hot End: | -60℉to 617℉ (-51℃ to 325℃) |
Cool End: | -60℉to 284℉(-51℃ to 140℃) Operating |
Interconnecting Cable: | -60℉ to 482℉(-51℃ to 250℃) |
Relative Humidity: | 100% |
Process Pressure: | 400 psig (2.8 MPa) |
Vibration: | |
Hot End: | 0.0125” Double Amplitude; 10 – 88 Hz 5 G continuous; 88 – 1200 Hz |
Cool End: | IEC 60068-2-64 Spectrum A.2, Category 3 |
GE傳感器RS-FS-9009系列產品介紹及尺寸圖
The Flame Tracker Dry is an ultraviolet (UV) light sensitive detector used to measure the intensity of the flame in the combustion chambers of a gas turbine. Due to the use of a silicon carbide photodiode, the Flame Tracker Dry is very sensitive to the longer wavelength components of the UV light generated by the flame. These wavelengths penetrate the fog of fuel in the combustion can so the Flame Tracker Dry is significantly more sensitive to the flame than previous technologies, such as Geiger Mueller tubes. Being a UV sensitive device, the Flame Tracker Dry is not sensitive to the visible and infrared light generated by the hot combustion chamber walls so only the flame’s light is detected.
The Flame Tracker Dry also separates the UV light sensitive photodiode in the Hot End, mounted on the combustion cans, from the temperature sensitive electronics in the Cool End, mounted below the turbine in a cool zone. This allows the Flame Tracker Dry to be operated indefinitely without the use of a cooling system. The single unit cannot be modified or disassembled.
Flame Tracker Dry是一種紫外線(UV)光敏檢測器,用于測量燃?xì)廨啓C(jī)燃燒室中火焰的強度。由于使用了碳化硅光電二極管,F(xiàn)lame Tracker Dry對火焰產生的紫外線的較長波長分量非常敏感。這些波長會穿透燃燒罐中的燃料霧,因此,與以前的技術(例如蓋革·穆勒管)相比,“火焰追蹤器干燥”對火焰的敏感性要高得多。作為對紫外線敏感的設備,F(xiàn)lame Tracker Dry對燃燒室壁熱產生的可見光和紅外光不敏感,因此只能檢測到火焰光。
火焰追蹤器干燥器還將安裝在燃燒罐上的熱端中的紫外線敏感光電二極管與安裝在涼爽區域中渦輪下方的冷端中的溫度敏感電子設備分開。這樣就可以在不使用冷卻系統的情況下無限期地運行Flame Tracker Dry。單個單元不能修改或拆卸。
GE傳感器其他型號:
GE RS-FS-9001
GE RS-FS-9009-03
GE 124T5712P0001
GE RS-E2-0285P001
GE 362A1052P104
GE sensor NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年,定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣,液壓以及氣動解決方案的合作伙伴,我們利用我們的全球協作團隊,為客戶提供先進解決方案,市場知識以及相關增值服務來幫助優化客戶的工作效率,提高可靠性和安全性,致力于成為工業產品和解決方案的優質渠道。
如果有任何關于GE傳感器RS-FS-9009-03的疑問,請隨時與我們電聯,(021-3100 6702),我們將盡全力解決您的問題。
If you have any question for GE products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
GE傳感器RS-FS-9009-03介紹