WOODWARD截止閥GSOV25規格描述
Technical data | |
Performance | |
Closing time | no more than 0.100 seconds at 6200 kPa input pressure |
Opening time | no more than 0.300 seconds at min. 690 kPa input pressure |
Pressure drop | <69 kPa at 11340 kg/h |
Seat leakage class | ANSI/FCI 70-2, Class VI |
Maximum effective aperture | 15.5 cm 2 |
Cycle resource | 20000 cycles |
Control valve ventilation | does not exceed 400 cm3 / min |
Back pressure | 0 from valve inlet with 3450 kPa applied to valve outlet with inlet at atmospheric pressure and solenoid de-energized |
Working conditions/Environment | NACE compliant for all gaseous fuels; contact Woodward for special applications |
Fuel temperature | from -4 to +177 °C |
Operating temperature | from -20 to +121 °C, from -20 to +105 °C for dual-coil version |
Fuel type | Natural gas, propane, ethane, methane |
Gas source pressure | During normal operation from 690 to 6205 kPa |
Test pressure | 9308 kPa |
Pulse pressure | 34,475 kPa |
Particulate Matter in Fuel | Less than 10 μm in diameter; max. volume fraction 0.000030 |
Control valve filtration | 40 microns |
External control pressure (optional) | 1380 – 6200 kPa |
Electrical parameters | |
Available voltages | Nominal 24V, 125V DC |
Power consumption | nominal 10W |
Resistance to ground | min. 50 Mohm at 500 VDC |
Electrical connections | 1/2-14 NPT for conduit; 36" coil leads, 18" proximity sensor leads |
Proximity sensor | Changeover contact, normally open and closed contacts to indicate valve closure and/or normally open and closed contacts to indicate valve opening. |
Mechanical characteristics | |
Installation | Flange ANSI B16.5; 272 kg, 2 in. (51 mm) nominal pipe size (6.500 diameter flange with eight 0.625-11 UNC through holes for 5.000 bolts all around at inlet; 6.500 diameter flange with eight 0.688 holes for 5.000 bolts all around at outlet) |
Side seal/ventilation connection | 0. 562-18 UNJF (-06) straight thread |
Weight | 34 kg |
Line pressure relief (removable plug) | 0.438-20 UNJF (-04) straight thread |
Connecting external control pressure | 0.438-20 UNJF (-04) straight thread |
Design | Stainless steel body; internal components – dispersion-hardened stainless steel |
WOODWARD截止閥GSOV25產品介紹
Woodward GSOV25 HT 燃料截止閥旨在以最快的速度關閉工業燃?xì)鉁u輪發動機中的氣體燃料。閥門關閉時，氣流完全停止，從入口到出口沒有泄漏。與標準版本相比，“HT”版本可以承受更高的燃料溫度和更高的背壓。它適用于 -20 至 +177 °C 的氣體溫度。該閥門在反向關閉時符合 ANSI Class IV 的關閉能力，壓差為 3450 kPa。
常閉閥可用于緊急和正常關閉。特殊的密封設計可防止泄漏并延長使用壽命。不銹鋼結構確保無論在何種腐蝕條件下都能保持高可靠性。
該產品適用于帶有單個或分支燃料入口歧管的 10 至 50 W 工業渦輪機。
描述
GSOV25 HT 燃料截止閥通過快速關閉氣體燃料的供應，提供了一種關閉燃?xì)鉁u輪機的方法。施加的壓力用于移動閥門中的彈簧活塞。當閥門通電時，氣壓使彈簧活塞保持打開狀態，使燃料流向渦輪機。當電磁閥的電信號丟失時，次級彈簧活塞將反轉以釋放主控制壓力。然后主彈簧迫使主活塞抵住密封件，從而停止流動。
The Woodward GSOV25 HT Fuel Shutoff Valve is designed to provide the fastest shutoff possible for gaseous fuel in industrial gas turbine engines. Gas flow is completely stopped when the valve closes, and there is no leakage from inlet to outlet. The “HT” version can withstand higher fuel temperatures and higher back pressure than the standard version. It is suitable for gas temperatures from -20 to +177 °C. The valve meets the shutoff capability of ANSI Class IV in the reverse direction with a pressure differential of 3450 kPa.
The normally-closed valve can be used for both emergency and normal shutoff. Special seal design prevents leakage and prolongs service life. Stainless steel construction ensures high reliability regardless of corrosive conditions.
The product is suitable for use on industrial turbines from 10 to 50 W with a single or branched fuel inlet manifold.
Description
The GSOV25 HT Fuel Shutoff Valve provides a means of shutting down a gas turbine by quickly shutting off the supply of gaseous fuel. The applied pressure is used to move a spring-loaded piston in the valve. When the valve is energized, the gas pressure holds the spring-loaded piston open, allowing fuel to flow to the turbine. When the electrical signal to the solenoid is lost, the secondary spring-loaded piston reverses to relieve the primary control pressure. The main spring then forces the primary piston against the seal, stopping the flow.
常用WOODWARD截止閥型號：
WOODWARD GSOV25
WOODWARD Stop valve NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于WOODWARD截止閥GSOV25的疑問，請隨時與我們電聯，（021-3100 6702），我們將盡全力解決您的問題。
If you have any question for WOODWARD products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
WOODWARD截止閥GSOV25介紹
