KMC執行器MEP-4802規格描述
Specifications | |
Actuator Type | Electric |
Brand | KMC Controls |
Control Input | 0-10 VDC, 2-10 VDC |
Fail-Safe | No |
Feedback | Voltage |
Input Types | Proportional |
Mounting | V-Bolt/ Screws |
Normality (Fail) | Fail In Place |
Power Supply | 24 VAC |
Selection Guide | Actuator-Only |
Timing (sec) | 90 |
Torque | 80 in-lb |
KMC執行器MEP-48系列描述
These compact but powerful direct-coupled actuators provide tri-state or proportional control for small dampers or valves in HVAC systems. A minimum torque of 40 (MEP-40xx) or 80 (MEP-48xx) inch-pounds is available over the 95° angular rotation.
The MEP-4002/4022/4802/4822 proportional actuator models accept a 0-10 or 2-10 volts DC control signal input from a thermostat, controller, or building automation system. “Anti-jitter” circuitry significantly reduces hunting and needless wear on the actuator and valve packing or damper components (from unnecessary miniscule position changes caused by undamped analog input signals). A user-initiated, auto-mapping feature provides better equipment control by reassigning the 0-10 or 2-10 volts DC input signal range over a reduced rotation range (from 45° to 95°). These models also feature a switch-selectable, 1–5 or 2–10 (or 0–5 or 0–10) VDC voltage feedback output that is proportional to the actuator position.
The MEP-4001/4003/4013/4021/4801/4813/4821 tri-state/two-position models are designed for use with floating thermostats, controllers, or building automation systems. The MEP-4013/4813 models feature a 10,000 ohm (+/- 10%), three-wire potentiometer feedback output. (The tri-state MEP-4003/4003V do not have two-position functionality or the larger green top enclosure.)
The MEP-4×21/4×22 models also have a fully adjustable, built-in SPDT auxiliary switch, for remote position indication or controller and equipment interface.
MEP-4001V/4002V/4003V actuators have brackets with a patented, quick-mounting mechanism that mounts directly on VFB-43…BC and VFB-46…BC series valve bodies (or VFB-43…BX and VFB-46…BX series with HPO-5074 kit). (See the “V” Models Valve Cross-Reference section in the data sheet for more information.)
All other MEP-4000s mount directly to 1/4- to 5/8-inch (6 to 16 mm) round shafts or 1/4- to 7/16-inch (6 to 11 mm) square shafts, eliminating the need for expensive and complicated linkages. A non-rotation bracket, to prevent lateral movement, is included with each actuator. A gear disengagement feature allows manual positioning of the actuator.
For fail-safe versions of these actuators, see the MEP-4200/4500/4900 series. See also the modular MEP-4042/4842 and the fast-operating 10 in-lb. MEP-4101.
這些緊湊但功能強大的直接耦合執行器為 HVAC 系統中的小型阻尼器或閥門提供三態或比例控制。 在 95° 角旋轉范圍內，最小扭矩為 40 (MEP-40xx) 或 80 (MEP-48xx) 英寸磅。
MEP-4002/4022/4802/4822 比例執行器型號接受來自恒溫器、控制器或樓宇自動化系統的 0-10 或 2-10 伏直流控制信號輸入。 “抗抖動”電路顯著減少了執行器和閥門密封件或阻尼器組件上的擺動和不必要的磨損（由無阻尼模擬輸入信號引起的不必要的微小位置變化）。 用戶啟動的自動映射功能通過在縮小的旋轉范圍（從 45° 到 95°）內重新分配 0-10 或 2-10 伏直流輸入信號范圍來提供更好的設備控制。 這些型號還具有開關可選、1-5 或 2-10（或 0-5 或 0-10）VDC 電壓反饋輸出，與執行器位置成比例。
MEP-4001/4003/4013/4021/4801/4813/4821 三態/二位型號設計用于浮動恒溫器、控制器或樓宇自動化系統。 MEP-4013/4813 型號具有 10,000 歐姆 (+/- 10%)、三線電位器反饋輸出。 （三態 MEP-4003/4003V 沒有兩位功能或更大的綠色頂部外殼。）
MEP-4×21/4×22 型號還有一個完全可調的內置 SPDT 輔助開關，用于遠程位置指示或控制器和設備接口。
MEP-4001V/4002V/4003V 執行器的支架帶有獲得專利的快速安裝機構，可直接安裝在 VFB-43…BC 和 VFB-46…BC 系列閥體（或 VFB-43…BX 和 VFB-46…BX 系列）上 帶 HPO-5074 套件）。 （有關更多信息，請參見數據表中的“V”型閥門交叉參考部分。）
所有其他 MEP-4000 直接安裝到 1/4 至 5/8 英寸（6 至 16 毫米）圓軸或 1/4 至 7/16 英寸（6 至 11 毫米）方軸上，無需 昂貴而復雜的聯系。 每個執行器都包含一個非旋轉支架，以防止橫向移動。 齒輪脫離功能允許手動定位執行器。
有關這些執行器的故障安全版本，請參閱 MEP-4200/4500/4900 系列。 另請參閱模塊化 MEP-4042/4842 和快速運行的 10 in-lb。 MEP-4101。
KMC執行器其他常用型號：
KMC MEP-4802
KMC MEP-4002
KMC MEP-4022
KMC MEP-4822
KMC Actuator NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于KMC執行器MEP-4802的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for KMC products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
KMC執行器MEP-4802規格描述
