亚洲日韩精品无码一区二区三区,日韩精品无码一区二区三区久久久 ,国产高清乱理伦片中文,无码精品久久久天天影视

IZE學院 訂單查詢

0086-21-31006702 聯系我們 關于我們 賬號注冊及登錄EN
您當前的位置: 首頁 >> 產品中心 >> 工業過程控制及儀表 >> 壓力儀表丨壓力變送 >> 智能差壓變送器 >> FOXBORO差壓變送器IDP10 I/A系列

FOXBORO差壓變送器IDP10 I/A系列

請注意:照片可能并不是實際產品,具體請參閱標題和產品規格及所有細節描述。
產品品牌:
型號:IDP10-TS3C01F-M1L1T
FOXBORO變送器IDP10系列 IDP10-TS3C01F-M1L1T
預估貨期:
關  鍵  詞:FOXBORO變送器IDP10-TS3C01F-M1L1T
相似產品:
是否有問題?聯系我們工作人員
  郵件聯系

FOXBORO變送器IDP10系列產品參數

Specification


Communication Protocol:

4 to 20 mA dc with HART communication

Remote Communications:

Must not interfere with output

Accuracy:

Digital Output, Linear: ±0.050% of calibrated span 4 to 20 mA Output, Linear: ±0.060% of calibrated span

Damping:

Settable for a range of none to 32 seconds

RFI Protection:

0.1% error between 27 and 1000 MHz at 30 V/m field intensity

Span Limits:

0.5 and 30 inH2O, 3.5 and 200 inH2O, 1 and 30 psi, 10 and 300 psi, 100 and 3000 psi, as specified; or SI and metric equivalents.

Proof Pressure:

14,500 psi for standard transmitters

Mounting:

On process piping, on a manifold, or optional mounting bracket

Input Connection:

With process connectors to accept 1/4 NPT, 1/2 NPT, Rc 1/4, Rc 1/2, or 1/2 Schedule 80 welding neck; or 1/2 NPT PVDF inserts installed in 316 ss process covers; or prepared for a direct connect seal; or prepared for a single remote capillary connected seal, or two remote capillary connected seals.

Electronics Housing:

316 ss, or aluminum housing with epoxy finish

Modular Electronics:

Enclosed in a NEMA 4X (IEC IP66) housing sealed with O-rings for protection against moisture or other contaminants. Optional Integral LCD indicator with onboard configuration pushbuttons.

Process Cover:

Traditional Structures
Steel, 316 ss, Monel, Nickel alloy (a) or PVDF insert
Low Profile Structures:
316 ss

Sensor Materials: T

Traditional Structure:
316L ss, Nickel alloy(a), Co-Ni-Cr, Monel, Tantalum, or
Gold-Plated 316L ss
Low Profile Structures:
316L ss or Nickel alloy(a)

Approvals and Certifications:

Must be suitable for Division 1 hazardous locations, and conform to all applicable European Union Directives. Also versions available to meet Agency flameproof and zone requirements.

Approximate Mass: (with Process Connectors)

4.2 kg (9.2 lb), with Traditional Structures;
Add 0.1 kg (0.2 lb) with Low Profile Structure LP1;
Add 0.8 kg (1.8 lb) with Low Profile Structure LP2;
Add 1.1 kg (2.4 lb) with 316 ss housing;
Add 0.2 kg (0.4 lb) with optional LCD indicator.

Model Code:

I/A Series IDP10 Intelligent d/p Cell Transmitter with HART Communication Protocol, with or without pressure seals, or equivalent.

愛澤工業(ize-industries)并不是本網站所列所有產品的授權代理商或經銷商。 本網站使用的所有產品名稱,商標,品牌等均屬于各自品牌廠家所有。 本網站在產品或圖片描述中,出現具有這些名稱,商標,品牌等信息的產品僅用于識別目的,并非旨在表明任何與持有者的從屬及授權關系。

FOXBORO變送器IDP10系列產品介紹

Foxboro品牌I / A系列IDP10型是智能的兩線制d / p電池變送器,可提供精確,可靠的壓差測量,并傳輸4至20 mA的輸出信號以及疊加的HART數字信號以進行遠程配置和監控。

 

The Foxboro brand I/A Series Model IDP10 is an Intelligent, two-wire d/p Cell transmitter that provides precise, reliable, measurement of differential pressure, and transmits a 4 to 20 mA output signal with a superimposed HART digital signal for remote configuration and monitoring.

 

FOXBORO差壓變送器IDP10系列特征

硅應變計傳感器已成功地在數千個裝置中進行了現場試驗。

簡單、優雅的傳感器包裝,很少有部件達到極高的可靠性。

變送器可用于傳統或低剖面結構。

鋁外殼具有耐用、耐腐蝕的環氧樹脂飾面;也可提供316不銹鋼外殼;均符合NEMA 4X和IP66等級。

可作為密封測量系統提供,具有多種配置的直接連接或毛細管連接密封。

作為選項提供的SIL2認證變送器。

可選的安裝支架組允許對變送器進行管道、表面或歧管安裝。

帶哈特的遠程配置

單回路或多點模式下的通信協議;或通過可選的液晶顯示器進行本地通信。

FM、CSA和ATEX本質安全裝置可使用多標記。用戶確定并在銘牌上永久標記要申請的認證。

用戶輸入的截止點為最大流量的0%至20%。

經CSA認證的雙重密封,符合ANSI/ISA 12.27.01-2003要求。

行業標準316L ss、Co-Ni-Cr、鎳合金(1)、蒙乃爾合金或鉭傳感器材料,取決于變送器結構。

 

Silicon strain gauge sensors successfully fieldproven in many thousands of installations.

Simple, elegant sensor packaging, with very few parts achieves exceptionally high reliability.

Transmitter available with traditional or low profile structures (see photos above).

Aluminum housing has durable, corrosionresistant epoxy finish; 316 ss housing also available; both meet NEMA 4X and IP66 ratings.

Can be provided as a sealed measurement system with numerous configurations of direct connect or capillary connected seals available.

SIL2-Certified Transmitter offered as an option.

Optional mounting bracket sets allow pipe,surface, or manifold mounting of transmitter.

Remote configuration with HART

communication protocol in a single loop or multidrop mode; or locally via optional LCD indicator.

Multi-marking is available for FM, CSA, and ATEX intrinsically safe installations. The user determines and permanently marks on the data plate the certification to be applied.

User-entered cutoff point from 0 to 20% of maximum flow.

Dual Seal certified by CSA to meet ANSI/ISA 12.27.01-2003 requirements.

Industry standard 316L ss, Co-Ni-Cr, Nickel alloy(1), Monel, or Tantalum sensor materials,depending on transmitter structure.

 

FOXBORO變送器IDP10系列其他常見型號:

FOXBORO IDP10-T22B01C-L1K1

FOXBORO IDP10-T22B01C-M1L1

FOXBORO IDP10-A22C01F-M1

FOXBORO IDP10-A20B21F-M1

FOXBORO IDP10-T22A21E-M1V

FOXBORO IDP10-TLLC05E-L1B3T

FOXBORO IDP10-D22B21F-C1

FOXBORO IDP10-TS3C01F-M1L1T

 

FOXBORO differential pressure transmitter NEW + ORIGINAL+ ONE YEAR WARRANTY

 

愛澤工業成立于2010年,定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣,液壓以及氣動解決方案的合作伙伴,我們利用我們的全球協作團隊,為客戶提供先進解決方案,市場知識以及相關增值服務來幫助優化客戶的工作效率,提高可靠性和安全性,致力于成為工業產品和解決方案的優質渠道。

 

如果有任何關于FOXBORO變送器IDP10-TS3C01F-M1L1T的疑問,請隨時與我們溝通(021-31006702)。我們將盡全力解決您的問題。

 

If you have any question for FOXBORO products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.


FOXBORO變送器IDP10-TS3C01F-M1L1T產品參數

免責聲明:本網站的布局,設計和編輯版權歸?上海愛澤工業設備有限公司(簡稱ize-industries)所有,保留所有相關權利。 Ize-industries銷售工業領域的全新產品,庫存產品,并不斷開發渠道購買此類產品。 本網站未經所有制造商或商標授權或批準。ize-industries不是所有制造商的授權經銷商,附屬公司或代表處。除非另有明確說明,否則此處出現的指定商標,品牌名稱和品牌均為其各自所有者的財產。