ANALOG DEVICES模塊AD7714YNZ產品介紹
AD7714 是一款完整的模擬前端，適用于低頻測量應用。該器件直接從傳感器接收低電平信號并輸出串行數字字。它采用 sigma-delta 轉換技術，可實現高達 24 位的無失碼性能。輸入信號應用于基于模擬調制器的專有可編程增益前端。調制器輸出由片上數字濾波器處理。該數字濾波器的第一個陷波可通過片上控制寄存器進行編程，從而允許調整濾波器截止和穩定時間。
該器件具有三個差分模擬輸入（也可配置為五個偽差分模擬輸入）以及一個差分參考輸入。因此，AD7714 可為包含多達五個通道的系統執行所有信號調節和轉換。最近，現有系列中又添加了一個新 Y 級。與 A 級相比，這個新級具有更大的工作溫度范圍、SCLK 和 DIN 上的施密特觸發器輸入、更嚴格的線性度規格、更低的功耗，并且采用更小的封裝。
AD7714 非常適合用于基于智能微控制器或 DSP 的系統。它具有一個串行接口，可以配置為三線操作。可以使用串行端口在軟件中配置增益設置、信號極性和通道選擇。AD7714 提供自校準、系統校準和后臺校準選項，還允許用戶讀取和寫入片上校準寄存器。
CMOS 結構確保非常低的功耗，斷電模式可將待機功耗降低至 3 V 時的典型值 15 μW。A 級的最低工作電壓為 3 V，Y 級的最低工作電壓為 2.7 V。A 級采用 24 引腳、0.3 英寸寬的塑料雙列直插式封裝 (DIP)；24 引腳小外形 (SOIC) 封裝和 28 引腳縮小外形封裝 (SSOP)。新的 Y 級產品采用 24 引腳、0.3 英寸寬的塑料雙列直插式封裝 (DIP)；24 引線小外形 (SOIC) 封裝和 24 引線薄型縮小外形封裝 (TSSOP)。
特性
電荷平衡 ADC
24 位無缺失代碼
0.0015% 非線性
五通道可編程增益前端
增益從 1 到 128
可配置為三個全差分
輸入或五個偽差分輸入
三線串行接口
SPI?、QSPI?、MICROWIRE? 和 DSP 兼容
3 V (AD7714-3) 或 5 V (AD7714-5) 操作
低電流（典型值 350 μA），斷電（典型值 5 μA）
低噪聲（<150 nV rms）
具有可編程濾波器截止頻率的低通濾波器
The AD7714 is a complete analog front end for low-frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time.
The part features three differential analog inputs (which can also be configured as five pseudo-differential analog inputs) as well as a differential reference input. The AD7714 thus performs all signal conditioning and conversion for a system consisting of up to five channels. A new Y grade has recently been added to the existing range. Compared to the A grades this new grade has an extended operating temperature range, schmitt trigger inputs on SCLK and DIN, tighter linearity specifications, lower power consumption and is available in a smaller package.
The AD7714 is ideal for use in smart microcontroller- or DSP-based systems. It features a serial interface that can be configured for three-wire operation. Gain settings, signal polarity and channel selection can be configured in software using the serial port. The AD7714 provides self-calibration, system calibration and background calibration options and also allows the user to read and write the on-chip calibration registers.
CMOS construction ensures very low power dissipation, and the power-down mode reduces the standby power consumption to 15 μW typical at 3 V. Minimum operating voltage for the A grades is 3 V and 2.7 V for the Y grades. The A grades are available in a 24-pin, 0.3 inch-wide, plastic dual-in-line package (DIP); a 24 lead small outline (SOIC) package and a 28-lead shrink small outline package (SSOP). The new Y grade is available in a 24-pin, 0.3 inch-wide, plastic dual-in-line package (DIP); a 24 lead small outline (SOIC) package and a 24-lead Thin Shrink Small Outline Package (TSSOP).
Features
Charge Balancing ADC
24 Bits No Missing Codes
0.0015% Nonlinearity
Five-Channel Programmable Gain Front End
Gains from 1 to 128
Can Be Configured as Three Fully Differential
Inputs or Five Pseudo-Differential Inputs
Three-Wire Serial Interface
SPI?, QSPI?, MICROWIRE? and DSP Compatible
3 V (AD7714-3) or 5 V (AD7714-5) Operation
Low Current (350 μA typ) with Power-Down (5 μA typ)
Low Noise (<150 nV rms)
Low-Pass Filter with Programmable Filter Cutoffs
ANALOG DEVICES模塊AD7714系列其他常用型號：
ANALOG DEVICES AD7714YRZ
ANALOG DEVICES AD7714ARZ-5REEL
ANALOG DEVICES AD7714ANZ-5
ANALOG DEVICES AD7714ARZ-5
ANALOG DEVICES AD7714ARSZ-5
ANALOG DEVICES AD7714YRUZ-REEL7
ANALOG DEVICES AD7714YRZ-REEL7
ANALOG DEVICES AD7714YRZ-REEL
ANALOG DEVICES AD7714YNZ
ANALOG DEVICES AD7714ARSZ-3REEL
ANALOG DEVICES AD7714ARSZ-3
ANALOG DEVICES AD7714YRUZ-REEL
ANALOG DEVICES AD7714-3EBZ
ANALOG DEVICES AD7714ARZ-3REEL
ANALOG DEVICES AD7714ARSZ-5REEL
ANALOG DEVICES AD7714YRUZ
ANALOG DEVICES AD7714ARZ-3
ANALOG DEVICES module NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于ANALOG DEVICES模塊AD7714YNZ的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for ANALOG DEVICES products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
ANALOG DEVICES模塊AD7714YNZ產品參數
