亚洲日韩精品无码一区二区三区,日韩精品无码一区二区三区久久久 ,国产高清乱理伦片中文,无码精品久久久天天影视

Voltage Rating

200 to 240 V 380 to 460 V 500 to 690 V

POWER REQUIREMENTS

Input Tolerance

Voltage: ±10%; Frequency ±5%

Output Frequency

0 to 500 Hz

CONTROL SPECIFICATIONS

Control Method

Sinusodial Pulse Width Modulation (PWM); Flux-Field Current Vector Control; Set Point Control (PID)

V/Hz Control

Constant Torque, Voltage Decrease Curve, Automatic Torque Boost, Sensorless Vector Control, Five-Point V/Hz Custom Curve, PM Drive, & PG Feedback Vector Control

PWM Carrier Frequency

Adjustable 1.0 to 16 kHz (For Drive Specific Information Consult Factory)

Frequency Setting

Rotary Encoder Integrated into EOI, 0 to 10 VDC, ±10 VDC, 4 to 20 mA, Digital Input, Binary Input, & Motorized Potentiometer Input

Frequency Precision

Analog Input ±0.2% of Maximum Output Frequency; Discrete/Communications Input ±0.01% of Maximum Output

Main Protective Functions

Overcurrent, Overvoltage, Inverter Overheat, Load-Side Short Circuit, Ground Fault, ASD Overload, Communications Error, Auto-Tuning Error, Emergency Stop, Undervoltage, Overtorque, Open-Output Phase, Motor Overload, Low Operating Current, Option PCB Error, & Gate Array Error

Retry

User-Set Number of Retries for Automatic System Restart After Trip

Restart

Able to Smoothly Catch Freewheeling Motor (Bidirectional)

Overload Current Rating

100% Continuous; 150% for One Minute

CONTROL INTERFACE

Digital Input

Eight Discrete Input Terminals Programmable to 67 Functions (May Be Increased Using Optional Hardware)

Digital Output

Three Discrete Output Terminals Programmable to 65 Functions; One Form-C Contact & Two Open Collector Outputs

Analog Input

Three Programmable: One 4 to 20 mA, One 0 to 10 VDC Input, & One ±10 VDC Input

Analog Output

Two Programmable: One 4 to 20 mA or 0 to 10 VDC & One 0 to 1 mA Output or 0 to 7.5 VDC

Communication Ports

Two-Wire RS485 & Four-Wire RS485

ELECTRONIC OPERATOR INTERFACE (EOI)

Display

Integral 7 Segment LED Keypad for Programming, Monitoring, & Diagnostics

LED Indicators

Run, Prg, Mon, %, Hz, & DC Bus Charge Indicator (Red)

Keys

Run, Stop, Mode, Ent, Up, Down, & Easy

Monitoring

Output Current, DC Voltage, Output Voltage, Run Time, Motor Load, Motor Overload, ASD Load, Output Power, RR Input, V/I Input, RX Input, RX2 Input, & AM/FM Output

CONSTRUCTION

Enclosure

ANSI-RAL7016 Charcoal Gray; NEMA; IP20; Wall Mount; Front-Access Only

Power Cables

Top/Bottom Access for Input/Motor Cables

Cooling

Forced-Air Cooled; Heat-Sink Out the Back (Option)

Standards & Compliances

IEEE, UL, ULC, CSA, NEMA, NEC, CE, NOM-117, C-TICK, & GOST

AMBIENT CONDITIONS

Ambient Temperature

-10 to 50°C (60°C with Derate)

Altitude

3300 ft. Above Sea Level

Humidity

95% Maximum (Non-Condensing)

Installation

Indoor; No Direct Sunlight; Protect from Corrosive Gases