WILO水泵Stratos MAXO 80/0,5-12 PN6產品參數
Operating Data | |
Fluid temperature T | -10 °C |
Ambient temperature T | -10 °C |
Maximum operating pressure PN | 6 bar |
Minimum suction head at 50 °C m | 7 m |
Minimum suction head at 95 °C m | 15 m |
Minimum suction head at 110 °C | 23 m |
Motor data | |
Energy efficiency index (EEI) | 0.17 |
Interference emission | EN 61800-3;2004+A1;2012 /residential area (C1) |
Interference immunity | EN 61800-3;2004+A1;2012 /industrial environment (C2) |
Mains connection | 1~230 V, 50/60 Hz |
Power consumption P1 max | 1410 W |
Min. speed nmin | 500 1/min |
Max. speed nmax | 3050 1/min |
Protection class motor | IPX4D |
Threaded cable connection | 5 x M16x1.5 |
Materials | |
Pump housing | Grey cast iron |
Impeller | PPS-GF40 |
Shaft | 1.4028, DLC-coated |
Bearing | Carbon, antimony-impregnated |
Installation dimensions | |
Pipe connection on the suction side DNs | DN 80 |
Pipe connection on the discharge side DNd | DN 80 |
Port-to-port length L0 | 360 mm |
Ordering information | |
Brand | Wilo |
Product description | Stratos MAXO 80/0,5-12 PN6-R7 |
Net weight, approx. m | 32.9 kg |
WILO水泵介紹
Premium smart-pump Wilo-Stratos MAXO-R7 (R7 = without internal temperature sensor)
High efficiency in-line glandless pump with EC motor and electronic power adjustment. Can be used for cold water, heating water and water/glycol mixtures. Energy efficiency index (EEI) between ≤ 0.17 and ≤ 0.19 depending on pump type.
Control modes:
Permanent, automatic power adjustment to system requirements without setpoint specification Wilo Dynamic Adapt plus (factory setting). Up to 20% energy savings compared to dp-v control mode.
Constant temperature (T-const.)
Constant differential temperature (dT-const.)
Needs-based volume flow optimisation of the feeder pump through connectivity and communication between multiple pumps (Multi-Flow Adaptation).
Constant volume flow (Q-const.)
Differential pressure control (dp-c) to a remote point in the pipe network (index circuit evaluator)
Constant differential pressure (dp-c)
Variable differential pressure (dp-v) with the option to set the nominal duty point
Constant speed (n-const.)
User-defined PID control
Functions:
Heat quantity measurement (available with accessory Wilo fluid temperature sensor or analogue temperature sensors e.g. 2x PT1000)
Cooling quantity measurement (available with accessory Wilo fluid temperature sensor or analogue temperature sensors e.g. 2x PT1000)
Pump automatically deactivates when no flow is detected (No-Flow Stop)
Switchover between heating and cooling mode (automatic, external or manual) (automatic, available with the accessory Wilo fluid temperature sensor)
Adjustable volume flow limiter using the Q-Limit function (Qmin. and Qmax.)
Operating modes of twin-head pumps: Efficiency-optimised parallel operation for dp-c and dp-v, main and standby operation
Ability to save and restore configured pump settings (3 restoration points)
Fault and warning messages shown in plain text with advice on resolving the issue
Pump venting function for automatic venting of the rotor chamber
Automatic night setback (available with accessory Wilo fluid temperature sensor)
Automatic deblocking function and integrated full motor protection
Dry-running detection
Display:
Control mode
Setpoint
Volume flow
Temperature (available with accessory Wilo fluid temperature sensor)
Power consumption
Electric consumption
Active influences (e.g. STOP, No-Flow Stop)
Version:
2 configurable analogue inputs: 0–10 V, 2–10 V, 0–20 mA, 4–20 mA and commercially available PT1000; +24 V DC power supply
2 configurable digital inputs (Ext. OFF, Ext. Min, Ext. Max, heating/cooling, manual override (uncoupled from building automation), operation lock (key lock and remote operation configuration protection))
2 configurable signal relays for run signals and fault messages
Slot for Wilo-CIF modules with interfaces for building automation BA (optional accessories: CIF modules Modbus RTU, Modbus TCP, BACnet MS/TP, BACnet IP, LON, PLR, CANopen)
Wilo Net as a Wilo system bus for communication between Wilo products, e.g. Multi-Flow Adaptation; twin-head pump operation and Wilo-Smart Gateway
Automatic emergency operation with definable pump speed for exceptional circumstances, e.g. bus communication or sensor value malfunction
Graphic colour display (4.3 inches) with one-button manual operation
Use the Wilo-Assistant app to read and set operating data and –among other things– set up a commissioning protocol through the Bluetooth interface (no further accessories required)
Integrated dual pump management (twin-head pumps are prewired) when using 2 single pumps as twin-head pump unit (connection via Wilo Net)
Cable break detection when using an analogue signal (in connection with 2–10 V or 4–20 mA)
Outdoor installation with weather protection possible in accordance with the installation and operating instructions
Pre-set date and time
Thermal insulation shell for heating applications
Scope of delivery
Pump
Optimised Wilo-Connector the same for all sizes
2x threaded cable gland M16 x 1.5
2x gaskets
Thermal insulation shell
Installation and operating instructions
Optional accessories:
ClimaForm cold insulation to avoid the formation of condensate
CIF module: Modbus TCP, Modbus RTU, BACnet IP, BACnet MS/TP, LON, PLR, CANopen
PT 1000 (B) pipe contact sensor (for domestic hot water)
PT 1000 (AA) sensor for installation in immersion well
Differential pressure sensor
Smart Gateway
Wilo fluid temperature sensor (can be retrofitted for recording and displaying the fluid temperature, heat and cooling quantity and using the temperature-controlled control modes T-const., dT-const.)
高端智能水泵Wilo-Stratos MAXO-R7（R7 =無內置溫度傳感器）
高效管道屏蔽泵帶 EC 電機和電子功率調節裝置。可用于暖氣水、冷水和水/乙二醇混合液。根據水泵類型的不同而定，能效指數介于 ≤ 0.17 至 ≤ 0.19 之間。
調控方式：
持續自動按設備需求調整功率，不需要使用 Wilo-Dynamic Adapt plus 規定額定值（工廠設定）。與 dp-v 調控模式相比節省最多 20 % 的能量。
恒定溫度 (T-const.)
恒定溫差 (dT-const.)
與多臺水泵聯網通訊，按需優化給水泵的體積流量(Multi-Flow Adaptation)。
恒定體積流量 (Q-const.)
在管網內的清除點上進行壓差控制 dp-c（壞點調整）
恒定壓差 (dp-c)
可變壓差 (dp-v) ，包括正常的工況點輸入選項
恒定轉速 (n-const.)
用戶自定義 PID 控制
功能：
采集制熱量（可帶有附件Wilo流體溫度傳感器或模擬溫度傳感器，如2個PT1000）
采集制冷量（可帶有附件Wilo流體溫度傳感器或模擬溫度傳感器，如2個PT1000）
在零流量識別時自動關閉水泵 (No-Flow Stop)
在供暖和冷卻運行之間切換（自動、外部或手動）（自動，可帶有附件 Wilo 流體溫度傳感器）
可調式體積流量限制，通過 Q-Limit 功能（Qmin. 和 Qmax.）
雙頭泵運行模式：dp-c 和 dp-v 效率經過優化的并聯運行，主運行/后備運行
保存和恢復配置的水泵設置（3 個恢復點）
以明文顯示故障信息/警告信息，包括排除建議
用于轉子室自動通風的泵排氣功能
自動節能模式（可帶有附件Wilo流體溫度傳感器或模擬溫度傳感器，如PT1000）
自動解鎖功能和集成式全面的電機保護
空運行檢測
顯示：
調控模式
額定值
體積流量
溫度 （可帶有附件 Wilo 流體溫度傳感器）
功耗
耗電量
主動因素（比如 STOP、No-Flow Stop）
規格：
2 個可配置的虛擬輸入端：0 – 10 V，2 – 10 V，0 – 20 mA，4 – 20 mA 和常見的 PT1000；+24 V DC 電源
2 個可配置的數字輸入端（Ext. OFF、Ext. Min、Ext. Max、供暖/冷卻，手動觸發（樓宇自動化已脫離），操作鎖定（按鍵鎖定和遠程操作配置保護））
2 個可配置的運行和故障信息報告繼電器
Wilo CIF 模塊插入位置，帶樓宇自動化接口（可選附件：CIF 模塊 Modbus RTU、Modbus TCP、BACnet MS/TP、BACnet IP、LON、PLR、CANopen）
Wilo Net 作為 Wilo 系統總線，用于 Wilo 產品間的相互通訊，比如 Multi-Flow Adaptation；雙頭泵運行和 Wilo-Smart Gateway
在特殊狀態下緊急運行（可定義泵轉速），比如在總線通訊或傳感器值失靈時
圖像化彩色顯示屏（4.3 英寸），通過一鍵手動控制進行操作
讀取和設置運行數據，比如使用藍牙接口（不需要其他附件）通過 Wilo-Assistant App 創建調試記錄
集成雙頭泵管理（雙頭泵已完成布線），使用 2 個單頭泵時作為雙頭泵單元，通過 WILO Net 連接
在有模擬信號時（使用 2 – 10 V 或 4 – 20 mA）識別電纜斷裂
根據安裝及操作說明可以在有耐氣候保護裝置情況下在室外安裝
日期和時間已預先設置好
用于供暖應用的隔熱外殼
供貨范圍
水泵
為所有結構尺寸提供相同的經過優化的 Wilo 連接器
2x 電纜螺紋接頭 M16 x 1.5
2x 密封件
隔熱外殼
安裝及操作說明
可選附件：
制冷絕緣件 ClimaForm 用于避免形成凝露
CIF 模塊：Modbus TCP、Modbus RTU、BACnet IP、BACnet MS/TP、LON、PLR、CANopen
PT 1000 (B) 管道敷設傳感器（適用于飲用水）
PT 1000 (AA) 熱護套內安裝用傳感器
壓差傳感器
智能網關
Wilo 流體溫度傳感器（可以加裝，用于記錄和顯示介質溫度、熱量和冷量的測定以及使用溫控的調控模式 T-const.、dT-const.）
WILO水泵他常見型號：
WILO Stratos MAXO 80/0,5-12 PN6
WILO Stratos MAXO 80/0,5-6 PN6
WILO Stratos MAXO 80/0,5-6 PN6-R7
WILO Stratos MAXO 80/0,5-6 PN10
WILO Stratos MAXO 80/0,5-6 PN10-R7
WILO Stratos MAXO 80/0,5-6 PN 16
WILO Stratos MAXO 80/0,5-12 PN6-R7
WILO Stratos MAXO 80/0,5-12 PN10
WILO Stratos MAXO 80/0,5-12 PN10-R7
WILO Stratos MAXO 80/0,5-12 PN 16
WILO Stratos MAXO 80/0,5-16 PN6
WILO Stratos MAXO 80/0,5-16 PN6-R7
WILO Stratos MAXO 80/0,5-16 PN10
WILO Stratos MAXO 80/0,5-16 PN10-R7
WILO Stratos MAXO 80/0,5-16 PN 16
WILO pump NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于WILO水泵Stratos MAXO 80/0,5-12 PN6的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for WILO products, please feel free to dial 0086-21-3100 6702/ send request eAADail to sales@ize-industries.coAAD / browse our website: .
WILO水泵Stratos MAXO 80/0,5-12 PN6產品介紹
