SUN閥CWGALHN技術參數
Technical Data | |
Cavity | T-23A |
Series | 3 |
Capacity | 60 gpm |
Pilot Ratio | 3:1 |
Maximum Recommended Load Pressure at Maximum Setting | 3075 psi |
Maximum Setting | 4000 psi |
Factory Pressure Settings Established at | 2 in3/min. |
Maximum Valve Leakage at Reseat | 5 drops/min. |
Check Cracking Pressure | 25 psi |
Adjustment - No. of CCW Turns from Min. to Max. Setting | 5 |
Operating Characteristic | Standard |
Reseat | >85% of setting |
Valve Hex Size | 1 1/4 in. |
Valve Installation Torque | 150 - 160 lbf ft |
Adjustment Screw Internal Hex Size | 5/32 in. |
Locknut Hex Size | 9/16 in. |
Locknut Torque | 80 - 90 lbf in. |
Model Weight | 1.59 lb. |
Seal kit - Cartridge | Buna: 990023007 |
Seal kit - Cartridge | Polyurethane: 990023002 |
Seal kit - Cartridge | Viton: 990023006 |
SUN閥CWGALHN產品介紹
帶先導輔助的通風平衡閥用于控制超負荷。止回閥允許從方向閥（端口 2）到負載（端口 1）的自由流動，而直接作用式先導輔助泄壓閥控制從端口 1 到端口 2 的流量。端口 3 處的先導輔助以先導比確定的速率降低泄壓閥的有效設定值。端口 2 處的背壓不會影響閥門設定，因為彈簧腔參考通風口（端口 4）。
此閥門的其他名稱包括運動控制閥和過中心閥。
? 平衡閥的設定壓力應至少為最大負載誘導壓力的1.3倍。
? 順時針旋轉調節裝置可減少設定值并釋放負載。
? 順時針旋轉設定為 200 psi (14 bar)。
? 所有 4 端口平衡閥、負載控制閥和先導開啟止回閥芯在物理上均可互換（即，對于給定的框架尺寸，具有相同的流路、相同的腔體）。
? 當閥門為標準設置時，復位壓力超過設定壓力的 85%。低于標準設定壓力的設置可能會導致復位百分比降低。
? 端口 4 處的壓力以 1 加上先導比乘以壓力的比率添加到有效泄壓設定中。
? Sun 平衡筒可以直接安裝到執行器外殼內加工的腔體中，以增加保護并提高電路的剛度。
? 該閥門所有端口之間均有正密封。
? 與非通風閥相比，通風閥可能需要較低的先導比來實現機器穩定性。
? 采用 Sun 浮動式結構，最大限度地減少由于安裝扭矩過大和/或腔體/墨盒加工變化而導致內部零件卡住的可能性。
Vented counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio. Backpressure at port 2 does not affect the valve setting because the spring chamber references the vent (port 4).
Other names for this valve include motion control valve and over-center valve.
? Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.
? Turn adjustment clockwise to decrease setting and release load.
? Full clockwise setting is 200 psi (14 bar).
? All 4-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
? Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.
? Pressure at port 4 is added to the effective relief setting at a rate of 1 plus the pilot ratio times the pressure.
? Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
? This valve has positive seals between all ports.
? With vented valves, a lower pilot ratio may be required to achieve machine stability compared to non-vented valves.
SUN閥CWGA系列其他常用型號：
SUN CWGALHN
SUN CWGALHV
SUN CWGALHE
SUN CWGALIN
SUN CWGALIV
SUN CWGALIE
SUN CWGACHN
SUN CWGACHV
SUN CWGACHE
SUN CWGACIN
SUN CWGACIV
SUN CWGACIE
SUN VALVE NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于SUN閥CWGALHN的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for SUN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
SUN閥CWGALHN技術參數介紹
