SUN閥PVJBLAN技術參數
Technical Data | |
Cavity | T-24A |
Series | 4 |
Capacity | 80 gpm |
Maximum Operating Pressure | 5000 psi |
Factory Pressure Settings Established at | blocked control port (dead headed) |
Control Pilot Flow | 15 - 20 in3/min. |
Adjustment - No. of CW Turns from Min. to Max. setting | 5 |
Valve Hex Size | 1 5/8 in. |
Valve Installation Torque | 350 - 375 lbf ft |
Adjustment Screw Internal Hex Size | 5/32 in. |
Locknut Hex Size | 9/16 in. |
Locknut Torque | 80 - 90 lbf in. |
Model Weight | 3.53 lb. |
Seal kit - Cartridge | Buna: 990024007 |
Seal kit - Cartridge | Polyurethane: 990024002 |
Seal kit - Cartridge | Viton: 990024006 |
SUN閥PVJBLAN產品介紹
可通風的先導式減壓/泄壓閥可將入口處的高一次壓力降低至端口 1 處的恒定減壓，并具有從端口 1 到油箱（端口 3）的全流量泄壓功能。排氣口（端口 4）可用作通過先導閥或二通閥進行遠程控制的方法。
? 端口 3 處的壓力以 1:1 的比例直接添加到閥門設置中，并且不應超過 3000 psi (210 bar)。
? 先導閥在減壓和泄壓模式之間表現出非常低的死區過渡。
? 推薦的最大入口壓力由調節范圍決定。 D、E、N 和 Q 系列在入口壓力和減壓壓力之間的最大壓差為 2000 psi (140 bar) 的條件下進行測試。 A、B 和 H 系列是在入口壓力和減壓壓力之間的最大壓差為 3000 psi (210 bar) 的情況下進行測試的。 C 和 W 系列是在 5000 psi (350 bar) 入口壓力下進行測試的。
? 先導閥表現出異常平坦的壓力/流量特性，非常穩定且滯后性低。
? 從減壓（端口 1）到入口（端口 2）的完全反向流動可能導致主閥芯關閉。如果回路中需要反向自由流動，請考慮在回路中添加單獨的止回閥。
? 通過控制排氣口（端口 4）處的壓力，可以將閥門的有效設置控制在標稱閥門設置以下。
? 采用 Sun 浮動式結構，更大限度地減少由于安裝扭矩過大和/或型腔/墨盒加工變化而導致內部零件粘合的可能性。
Ventable, pilot-operated pressure reducing/relieving valves reduce a high primary pressure at the inlet to a constant reduced pressure at port 1, with a full-flow relief function from port 1 to tank (port 3). The vent port (port 4) can be used as a means for remote control by pilot or 2-way valves.
? Pressure at port 3 is directly additive to the valve setting at a 1:1 ratio and should not exceed 3000 psi (210 bar).
? Pilot operated valves exhibit very low dead-band transition between reducing and relieving modes.
? Recommended maximum inlet pressure is determined by the adjustment range. Ranges D, E, N, and Q are tested with a 2000 psi (140 bar) maximum differential between inlet and reduced pressure. Ranges A, B, and H are tested with a 3000 psi (210 bar) maximum differential between inlet and reduced pressure. Ranges C and W are tested with 5000 psi (350 bar) of inlet pressure.
? Pilot operated valves exhibit exceptionally flat pressure/flow characteristics, are very stable and have low hysteresis.
? Full reverse flow from reduced pressure (port 1) to inlet (port 2) may cause the main spool to close. If reverse free flow is required in the circuit, consider adding a separate check valve to the circuit.
? By controlling the pressure at the vent (port 4), the effective setting of the valve can be controlled below the nominal valve setting.
? Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
SUN閥PVJB系列其他常用型號：
SUN PVJBLAN
SUN PVJBLAN/AP
SUN PVJBLAN/LH
SUN PVJBLAV
SUN PVJBLAV/AP
SUN PVJBLAV/LH
SUN PVJBLBN
SUN PVJBLBN/AP
SUN PVJBLBN/LH
SUN PVJBLBV
SUN PVJBLBV/AP
SUN PVJBLBV/LH
SUN VALVE NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于SUN閥PVJBLAN的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for SUN products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
SUN閥PVJBLAN技術參數介紹
