FLUTEC節流閥DRVP-16-01.2技術描述
DRVP=Needle valve with check valve |
16=Nominal size |
01 = standard (housing phosphated, seals FKM) |
2=determined by manufacturer |
FLUTEC節流閥DRVP-16產品介紹
Needle Valves with and without Reverse Flow Check Direct-Acting Manifold Mounted – 350 bar
DVP, DRVP 06 to 40
FEATURES
For regulating the speed of loads
For fine adjustment and shut-off of the flow
For system-related damping in hydraulic circuits
To release pressure from accumulator systems
As an emergency drain for lowering a load
High level of safety provided by patented spindle safety mechanism
A set-screw locks the setting
Choice of nine sizes ensures best possible adaptability to the system
Hardened and ground valve components to ensure minimal wear and extended service life
Optional nickel-plated version available (up to size 12)
The DVP is a manifold mounted flow control valve which controls the flow rate by adjusting the cross-section.
The flow rate is therefore dependent on the pressure differential and viscosity. Starting with the throttle spindle in the fully closed position, the flow rate increases in accordance with the appropriate curve as the control knob is turned. The flow is controlled in both directions.
The scale and coloured rings on the top of the control knob enable accurate repeat setting. The DRVP is a manifold mounted flow control valve which allows the same fine flow adjustment, but in one direction only. Unrestricted flow in the reverse direction is via the built-in check valve(cracking pressure 0.5 bar).
帶和不帶逆流止回直動式歧管安裝的針閥 – 350 bar
DVP、DRVP 06 至 40
特征
用于調節負載速度
用于微調和關閉流量
用于液壓回路中與系統相關的阻尼
釋放蓄能器系統的壓力
作為降低負載的緊急排放
獲得專利的主軸安全機構提供高水平的安全性
固定螺絲鎖定設置
九種尺寸的選擇確保對系統的最佳適應性
經過硬化和研磨的閥門部件可確保最小磨損并延長使用壽命
提供可選的鍍鎳版本（最大尺寸 12）
DVP 是一種安裝在歧管上的流量控制閥，它通過調節橫截面來控制流量。
因此，流量取決于壓差和粘度。 從節氣門軸處于完全關閉位置開始，隨著控制旋鈕的轉動，流量會根據適當?shù)那€增加。 流量在兩個方向上都受到控制。
控制旋鈕頂部的刻度和彩色環可實現準確的重復設置。 DRVP 是一種安裝在歧管上的流量控制閥，它允許進行相同的精細流量調節，但只能在一個方向上進行。 通過內置止回閥（開啟壓力 0.5 巴）實現反向無限制流動。
FLUTEC節流閥DRVP系列其他常用型號：
FLUTEC DRVP-06-01.X 705777
FLUTEC DRVP-08-01.X 705779
FLUTEC DRVP-10-01.X 705781
FLUTEC DRVP-12-01.X 705783
FLUTEC DRVP-16-01.X 705785
FLUTEC DRVP-20-01.X 705787
FLUTEC DRVP-25-01.X 705789
FLUTEC DRVP-30-01.X 705791
FLUTEC DRVP-40-01.X 705792
FLUTEC DRVP-16-01.2
FLUTEC Control valve NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于FLUTEC節流閥DRVP-16-01.2的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for FLUTEC products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
FLUTEC節流閥DRVP-16-01.2規格描述
