BEI IDEACOD編碼器H38系列技術參數
Mechanical | |
Shaft Diameter | 3/8” nominal |
Shaft Loading | Up to 40 pounds axial and 20 pounds radial applied 1/4” from housing |
Shaft Runout | 0.0005 T.I.R |
Starting Torque at 25°C | 4.0 in-oz (max) |
Bearings | Class ABEC 7 standard |
Shaft Material | 303 stainless steel |
Enclosure | Die cast aluminum, hard anodized with dichromate sealed finish. Shaft seals and sealed bearings are standard to achieve environmental ratings. |
Bearing Life | 2 X 108revs (1300 hrs at 2500 RPM) at rated load; 1 X 1010 revs (67,000 hrs at 2500 RPM) at10% of rated load |
Maximum RPM | 10,000 RPM (see frequency response, below) |
Moment of Inertia | 4.1 X 10–4 oz-in-sec2 UL & MSHA/ 1.7 X 10–3 oz-in-sec2 CEN |
Weight | 64 oz typical (approx 4 lbs) |
Electrical | |
Code | Incremental |
Output Format | 2 channels in quadrature, 1/2 cycle index gated with negative B channel |
Cycles per Shaft Turn | 1 to 72,000 (see table 2, page 5). For resolutions above 3,600 see Note 7. |
Supply Voltage | 5 to 28 VDC |
Current Requirements | 100 mA typical +output load, 250 mA (max) |
Voltage/Output | (see note 3) |
Protection Level | Reverse, overvoltage and output short circuit (see note 3) |
Frequency Response | 100 KHz Typical, Higher frequency response available, see note 5 |
Output Terminations | see Table 1, page 5 |
Termination Type | Compression type, UL recognized. Accepts AWG 14 to 22, stranded wire, strip 1/4” |
Note | Consult factory for other electrical options |
Environmental | |
Enclosure Rating | NEMA 4 X & 6 (IP66), outdoor Non-Hazardous locations, NEMA 4 X & 13 (IP66), indoor NonHazardous locations |
Temperature | Standard operating all models, 0° to +70°C; Storage all models, -50° to +90°C; Extended temp testing avail.: for UL, -40° to +80°C; for CEN, -50° to +90°C |
Shock | 50 g’s at 11 msec |
Vibration | 5 to 2000 Hz @ 20 g’s |
Humidity | 100% RH |
Hazardous Area Rating | UL listed for use in hazardous locations. Class I, Group D, or Class I, Groups C & D, and Class II,Groups E, F & G. NEMA Enclosure 7. |
BEI IDEACOD編碼器H38系列介紹
The H38 is an explosion proof version of the fieldproven H25 encoder series.
The H38 is UL certified for NEMA Class 4X and 6 (outdoor nonhazardous locations) and Class 4X and 13 (indoor non-hazardous locations). It is available with single and triple certifications for use in hazardous locations and includes a standard shaft seal, double bearing seals, and a cast aluminum housing with hard anodized and dichromate sealed finish. The H38 is suitable for use in petroleum service industries, solvent refining operations, spray painting applications, and explosive dust environments
H38是經過現場驗證的H25編碼器系列的防爆版本。
H38已獲得NEMA 4X和6級（室外非危險場所）和4X和13級（室內非危險場所）的UL認證。它可提供用于危險場所的單項和三項認證，包括標準軸封，雙軸承密封以及鑄鋁外殼，陽極氧化和重鉻酸鹽硬密封。H38適用于石油服務行業，溶劑精制操作，噴涂應用和爆炸性粉塵環境。
BEI IDEACOD編碼器H38系列其他常用型號列舉：
BEI IDEACOD H38D-12GC-S3-CW-SC-UL
BEI IDEACOD H38D-1024-ABZC-28V/V-SC-UL
BEI IDEACOD H38D-1800-ABZC-7272-SC-UL-S-S
BEI IDEACOD H38D1024ABC4469
BEI IDEACOD H38D1024ABZC7272
BEI IDEACOD H38D-1024-ABZC-7272-SC-UL2-S
BEI IDEACOD H38D-1800-ABZC-28V/V-SC-UL
BEI IDEACOS Encoders NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于BEI IDEACOD編碼器H38D-1800-ABZC-28V/V-SC-UL的疑問，請隨時與我們電聯，（021-3100 6702），我們將盡全力解決您的問題。
If you have any question for BEI-IDEACOD products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
BEI IDEACOD編碼器H38系列參數介紹
