亚洲日韩精品无码一区二区三区,日韩精品无码一区二区三区久久久 ,国产高清乱理伦片中文,无码精品久久久天天影视

IZE學院 訂單查詢

0086-21-31006702 聯系我們 關于我們 賬號注冊及登錄EN
您當前的位置: 首頁 >> 產品中心 >> 檢測-測量-傳感器 >> 位置丨速度丨加速度丨角度 >> LVDT丨位移傳感器丨位置指示器 >> POSITEK傳感器X111系列

POSITEK傳感器X111系列

請注意:照片可能并不是實際產品,具體請參閱標題和產品規格及所有細節描述。
產品品牌:
型號:X111.600AI1000NSUZ375
POSITEK傳感器X111.600AI1000NSUZ375
預估貨期:
關  鍵  詞:X111.600AI1000NSUZ375POSITEKX103X101
相似產品:
是否有問題?聯系我們工作人員
  郵件聯系

POSITEK傳感器X111系列產品參數

Specification

Intrinsic Safety


ATEX/IECEx approval

The sensor is ATEX/IECEx approved to:
Ex II 1G 
Ex ia IIC T4 GA (Ta = -40°C to +80°C). 
This designates the sensor as belonging to; Group II: suitable for all areas except mining, Category 1 G: can be used in areas with continuous, long or frequent periods of exposure to hazardous gas (Zone 0). Protection class ia, denotes intrinsically safe for all zones. Apparatus group IIC: suitable for IIA to IIC explosive gas. Temperature class T4: maximum sensor surface temperature under fault conditions 135°C. Ambient temperature range extended to -40°C to 80°C. Approval only applies to the specified ambient temperature range and atmospheric conditions in the range 0.80 to 1.10 Bar, oxygen <=21%.

Galvanic Isolation Amplifier

Intrinsically safe sensors must be used with a galvanically isolated amplifier with safety parameters not exceeding:- Ui: 11.4V, Ii: 0.2A, Pi: 0.51W.  Sensor can be installed with a cable length up to 1000m maximum from the amplifier, cable capacitance and inductance can be up to:- Capacitance: 200 nF max, Inductance: 810 μH max.
Approved amplifiers are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

Dimensions

Body Diameter

35mm

Body Length (Axial version)

Measurement length + 163mm

Body Length (Radial version)

Measurement length + 186mm

Push Rod Extension

Measurement length + 7mm

Travel

Any stroke from 0-5mm to 0-800mm (e.g. 305mm)

Independent Linearity

<±0.25% up to 450mm
<±0.50% up to 450mm
<±0.1% up to 450mm on request

Temperature Coefficient

<±0.01%/°C Gain & <±0.01%FS/°C Offset 

Resolution

Infinite

Noise

<0.02% FSO

Frequency Response

>10KHz (-3dB)

Temperature Limits

Operating

-40 to +80°C

Storage

-40 to +125°C

Other

EMC Susceptibility

EN 61000-6-2

EMC Radiated

EN 61000-6-3

Vibration

IEC 68-2-6: 10g

Shock

IEC 68-2-29: 40g

MTBF

350,000 hrs 40°C Gf

Sealing

IP65 (connector) / IP67 (cable)

Electrical Connections

Screened cable or integral connector

愛澤工業(ize-industries)并不是本網站所列所有產品的授權代理商或經銷商。 本網站使用的所有產品名稱,商標,品牌等均屬于各自品牌廠家所有。 本網站在產品或圖片描述中,出現具有這些名稱,商標,品牌等信息的產品僅用于識別目的,并非旨在表明任何與持有者的從屬及授權關系。

POSITEK傳感器X111系列產品介紹

本質安全型X111已通過ATEX和IECEx認證,可用于潛在爆炸性氣體/蒸氣環境。X101傳感器的這種重型版本具有更強的12.6mm推桿,推薦用于振動或需要更長行程傳感器,水平安裝并支撐在桿眼之間的應用。它仍然是為工業和科學反饋應用設計的價格合理,耐用,高精度的位置傳感器。該裝置高度緊湊且節省空間,幾乎可以響應整個長度。像所有Positek傳感器一樣,X111提供與位移成比例的線性輸出。每個傳感器都提供根據客戶要求的行程進行校準的輸出,從0-5mm到0-800mm,并且內置了完整的EMC保護。

 

傳感器非常堅固,閥體和推桿均由不銹鋼制成,使用壽命長且耐環境腐蝕。在很寬的溫度范圍內,總體性能,可重復性和穩定性都非常出色。該傳感器易于安裝,安裝選項包括M8桿眼軸承和車身夾具。推桿可免費提供或帶有M8內螺紋,M8桿眼或圓頂端固定,可向任一方向彈跳加載的推桿裝載在行程最大300mm的傳感器上。根據所選的電纜或連接器選件,環境密封等級達到IP65或IP67。

 

Positek本安傳感器設計為與電隔離放大器一起使用??梢詮腜ositek 獲得批準的電流隔離放大器(X005)??蛇x擇0.5-9.5V或4-20mA傳輸輸出。

 

傳感器與放大器之間的電纜長度最長為1km。

 

The intrinsically safe X111 is ATEX and IECEx approved for use in potentially explosive gas/vapour atmospheres. This heavy-duty version of the X101 sensor with a stronger 12.6mm push rod, recommended for applications where vibration is an issue or there is a need for longer travel sensors, mounted horizontally, and supported between rod eyes. It remains an affordable, durable, high-accuracy position sensor designed for industrial and scientific feedback applications. The unit is highly compact and space-efficient, being responsive along almost its entire length. Like all Positek sensors, the X111 provides a linear output proportional to displacement. Each sensor is supplied with the output calibrated to the travel required by the customer, from 0-5mm to 0-800mm and with full EMC protection built in.

 

The sensor is very robust, the body and push rod being made of stainless steel for long service life and environmental resistance. Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor is easy to install with mounting options including M8 rod eye bearings and body clamps. The push rod can be supplied free or captive, with female M8 thread, an M8 rod eye, or dome end, Captive push rods can be sprung loaded, in either direction, on sensors up to 300mm of travel. Environmental sealing is to IP65 or IP67, depending on selected cable or connector options.

 

Positek intrinsically safe sensors are designed to be used with a galvanically isolated amplifier .  Approved galvanic isolation amplifiers (X005) are available from Positek; there is a choice of 0.5-9.5V or 4-20mA transmission outputs.

 

The sensor can be installed with a cable length up to 1km between the sensor and the amplifier.

 

選型參考

POSITEK-傳感器X111系列 X111.600AI1000NSUZ375 愛澤工業 izeindustries (2).png 

 

POSITEK傳感器X111.600AI1000NSUZ375其他常見型號:

POSITEK X101

POSITEK X103

POSITEK X106

POSITEK X120

POSITEK X125

POSITEK X130

POSITEK E100

POSITEK E101

POSITEK E103

POSITEK P100

POSITEK P101

POSITEK X111.600AI1000NSUZ375

 

POSITEK LINEAR POSITION SENSOR NEW + ORIGINAL+ ONE YEAR WARRANTY

 

愛澤工業成立于2010年,定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣,液壓以及氣動解決方案的合作伙伴,我們利用我們的全球協作團隊,為客戶提供先進解決方案,市場知識以及相關增值服務來幫助優化客戶的工作效率,提高可靠性和安全性,致力于成為工業產品和解決方案的優質渠道。

 

如果有任何關于POSITEK傳感器X111.600AI1000NSUZ375的疑問,請隨時與我們溝通(021-31006702)。我們將盡全力解決您的問題。

 

If you have any question for POSITEK products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn .


POSITEK傳感器X111.600AI1000NSUZ375產品參數

免責聲明:本網站的布局,設計和編輯版權歸?上海愛澤工業設備有限公司(簡稱ize-industries)所有,保留所有相關權利。 Ize-industries銷售工業領域的全新產品,庫存產品,并不斷開發渠道購買此類產品。 本網站未經所有制造商或商標授權或批準。ize-industries不是所有制造商的授權經銷商,附屬公司或代表處。除非另有明確說明,否則此處出現的指定商標,品牌名稱和品牌均為其各自所有者的財產。