VELOMAT傳感器SKA-30A-3-1.50技術參數
Weight | about 0.5kg |
material | aluminium |
Degree of protection | IP 67 |
SKA | 30A-3 |
Nominal force / nominal load | 3 kN |
max. working force | 150% of the nominal force |
Breaking force | 400% of the nominal force |
Measuring signal | 4 - 20 mA |
operating voltage | 12 - 24VDC ±20% |
power consumption | max. 45 mA |
calibration tolerance | < 0.50% of final value |
non-linearity | < 0.25% of final value |
hysteresis | < 0.15% of final value |
Temperature error: | |
zero point | ≤ 0.04% of final value / K |
sensitivity | ≤ 0.04% of setpoint / K |
insulation resistance | > 5,000 million |
nominal temperature range | -15 °C to +70 °C |
service temperature range | -25 °C to +80 °C |
VELOMAT傳感器SKA-30A系列介紹
力傳感器根據橫向于縱軸的強度測量原理工作。
SKA-30A 設計用于輸送機秤、倉式稱重設備、平臺秤和高架輸送機秤，但也可用于測量施加在機器部件、杠桿、軸等上的力。
該設備被設計為帶有測量單元的梁。 由于梁形狀和兩個 13 毫米尺寸的鉆孔，安裝該組件時將滿足機器制造要求。 通過使用 M12 螺紋來傳遞力。
應變計的測量元件采用高彈性化合物鑄造而成，因此可以防止機械或化學損壞。
應變儀橋測量由于梁上的剪切力而在測量單元中引起的變形。 集成放大器可提供 1 至 9 mA 或 4 至 20 mA 之間的測量信號。 通過使用與應變計電橋并聯的電阻器進行校準（軟件校準）。
SKA-30A 用于直接連接到自動控制器或控制開關。
The force transducer works according to the strength measuring principle on a transverse basis to the longitudinal axis.
The SKA-30A is designed for application at conveyor scales, bin-type weighing devices, platform scales and overhead conveyor scales, but can also be used for measuring the forces applied on machine parts, levers, axles etc.
The device has been designed as a beam with a measuring cell. Due to the beam shape and two 13 mm size boreholes, all machine building requirements will be met when mounting this component. The force transfer is carried through by use of a M12 screw thread.
The measuring cell for the strain gauge has been cast with a high-elastic compound and is thus protected against mechanical or chemical damages.
The strain gauge bridges measure the caused deformation in the measuring cell due to the shear forces at the beam. An integrated amplifier gives a measuring signal between 1 and 9 mA or between 4 and 20 mA. The calibration is carried out by use of a resistor, parallel connected with a strain gauge bridge (software calibration).
The SKA-30A is assigned for the direct coupling to an automatic control or a controlling switch.
VELOMAT傳感器SKA-30A系列其他常用型號：
VELOMAT SKA-30A-0,98-1.50
VELOMAT SKA-30A-2-1.50
VELOMAT SKA-30A-1,5-1.S60
VELOMAT SKA-30A-3-1.50
VELOMAT TRANSDUCER NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于VELOMAT傳感器SKA-30A-3-1.50的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。
If you have any question for VELOMAT products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:jjxdch.cn.
VELOMAT傳感器SKA-30A-3-1.50技術參數及介紹
