FOXBORO信號轉換器E69F系列 示例E69F-TI2-JS
PHYSICAL SPECIFICATIONS | |
Enclosure | Diecast low copper aluminum alloy body and cover, with an epoxy powder finish. Meets the requirements of IEC IP65 and provides the environmental protection of NEMA Type 4. |
Mounting | Valve yoke, surface, or nominal DN 50 or 2 in pipe. Calibrated for vertical mounting unless otherwise specified. |
Approximate Mass | 2.3 kg (5 lb) |
Dimensions | Refer to “Dimensions – Nominal” on page 7, and to Dimension Print DP 018-430 |
Input/Output Connections | |
Electrical | Tapped for 1/2 inch conduit fitting to connect to a pair of 0.5 m (18 in) long 1.00 mm2 (18 AWG) twisted leads, |
Pneumatic | 1/4 NPT for air supply and output signal |
Data Plate | Aluminum data label fastened to housing with pressure sensitive adhesive. Includes space for customer tag data up to a maximum of 86 characters and spaces. For additional space, see optional Customer Tag. |
OPTIONAL FEATURES | |
Customer Tag | Stainless steel tag wired to converter for customer tag data that doesn't fit on data plate. There can be a maximum of 10 lines of data with 40 characters and spaces per line. Specify AS Code MTS. |
Split Range Input Signal | 4 to 12, 12 to 20, 10 to 30, or 30 to 50 mA dc. |
Selectable using Model Code and specifying split range required. | |
Alternative Output Signal | Refer to Invensys Foxboro for other than standard output signals. |
Explosionproof Junction Box | Integrally mounted to converter. Specify Model Code Suffix -J. |
PG11 Trumpet Type Cable Connection | For use with, and assembled to explosionproof (-J) junction box specified above. Also available without (-J) junction box for non-explosionproof applications. Not offered with Electrical Certification Specifications CS–E/CD–A and CS–E/FD–A.Specify AS Code PG–11. |
Adjustable Filter Regulator | Provided without gauge. Specify Model Code Suffix -R. |
Supply (Input) and Output Pressure Gauges | Must be selected per output range requirements. Integrally mounted to converter. Specify Model Code Suffix -S. |
Miniature Junction Box | Enclosure size is approximately 64 x 58 x 33 mm (2.5 x 2.3 x 1.3 in). Designed to meet the requirements of IEC IP65 and provide the environmental protection of NEMA Type 4. Provided with 1/2 inch NPT conduit connection, 20 mm (M20) threaded hole, or PG11 or PG13.5 trumpet type cable connections. These connections are located for either front or rear cable entry. This junction box is not available for explosionproof applications. Junction box with 1/2 inch conduit connection for front entry is optional selection -M, and with 1/2 NPT conduit connection for rear entry is optional selection -P |
FOXBORO信號轉換器E69F系列描述
E69F現場安裝的電流-氣動信號轉換器接受標準直流輸入信號，并將其轉換為比例氣動輸出信號，以便與其他氣動儀表或控制閥一起使用。如產品上的“CE”標志標志所示，該產品符合適用的歐盟指令。
結構緊湊，易于安裝
E69F轉換器是一種小巧，設計緊湊的設備，可以非常簡單地連接到電氣和氣動接口。它可以很容易地安裝在表面，閥門軛或垂直管道中的標稱DN50或2上。
環境大氣條件的最小影響
E69F轉換器中的檢流電機設計可在線圈和外殼之間提供足夠的間隙?？赡軐?dǎo)致腐蝕和灰塵顆粒的正常大氣變化不會妨礙機構的操作，有時會出現音圈型儀器。
應用多功能性
輸入和輸出信號的選擇，分離輸入范圍以及直接或反向動作使該轉換器可輕松適應各種應用。輸出信號可用于使該轉換器特別適用于閥門應用。
沖擊，振動和傾斜效應最小化
利用剛性反饋彎曲和低質量組件，可最大限度地減少過程應用中通常遇到的振動和沖擊的影響。在獨特的檢流電機中靜態平衡線圈極大地減少了傾斜效應。
FOXBORO信號轉換器E69F系列性能規格
準確性
輸出信號代碼2和3：量程±1.0％
輸出信號代碼7和8：量程±2％
線性
跨距的±0.5％，典型值（最大偏差受精度規格限制）
重復性
跨距的±0.25％，典型值（最大偏差受精度規格限制）
滯后
跨距±0.5％，典型值（最大偏差受精度規格限制）
無作用控制區
跨度0.1％
供應壓力影響
供給壓力的變化導致零移動小于每kPa跨度0.04％（0.25％/ psi）。
環境溫度影響
在0°C和60°C（32°F和140°F）的工作范圍內，環境溫度變化28°C（50°F）會導致零和跨度偏移為量程±1.0％或更小。
傾斜效應
對于從垂直方向傾斜5度的角度變化，最大零位移是跨度的0.25％。通過在預期安裝位置校準儀器可以消除此錯誤。
沖擊效應
在反饋支架上測得的沖擊試驗水平為300 m / s2（30“g”）時，最大零位移為量程的0.5％
FOXBORO信號轉換器E69F系列功能規格
愛澤工業(IZE INDUSTRIES)特價經銷、常用FOXBORO信號轉換器型號：
FOXBORO信號轉換器E69F-BI2-RS
FOXBORO信號轉換器E69F-TI2-JS
FOXBORO信號轉換器E69F-BI2-S
FOXBORO信號轉換器E69F-T12-S
FOXBORO信號轉換器E69F-TH2-JS
FOXBORO信號轉換器E69F-TI3
FOXBORO信號轉換器E69F-BH
FOXBORO信號轉換器E69F-BH2
FOXBORO信號轉換器E69F-BI3
愛澤工業集產品開發、設計、制造、銷售于一體，代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于FOXBORO信號轉換器E69F系列 示例E69F-TI2-JS的疑問，請隨時與我們溝通，愛澤工業（86-021-31006702）。我們將盡全力解決您的問題。
有關FOXBORO信號轉換器E69F系列 示例E69F-TI2-JS產品更詳細的信息或者購買美國FOXBORO相關產品，請致電愛澤工業。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
FOXBORO信號轉換器E69F系列E69F-TI2-JS
