REXROTH OIL CONTROL閥08.39.59-X-Y-Z 規格描述
Technical data | |
Max. operating pressure | 410 bar (5945 psi) |
Max. flow | 60 l/min. (16 gpm) |
Weight | see “Dimensions” |
Manifold material | Zinc plated steel |
Fluid | Mineral oil (HL, HLP) according DIN 51524 |
Fluid temperature range | -30 °C to 100 (-22 to 212 °F) |
Viscosity range | 5 to 800 mm2/s (cSt) |
Recommended degree of fluid | Class 19/17/14 according to |
MTTFd | 150 years see data sheet 18350-51 |
Other technical data | see data sheet 18350-50 |
Relief setting: at least 1.3 times the load induced pressure. | |
For higher stability at all flows and pressures, the pilot line includes hydraulic damping. | |
Note: for applications outside these parameters, please consult us. |
REXROTH OIL CONTROL閥08.39.59-X-Y-Z 外觀尺寸圖
REXROTH OIL CONTROL閥08.39.59-X-Y-Z 型號解析
REXROTH OIL CONTROL閥08.39.59-X-Y-Z系列介紹
Description
When pressure at V2 rises above the spring bias pressure,the check seat is pushed away from the piston and flow is allowed from V2 to C2. When load pressure at C2 rises above the pressure setting, the direct operated, differential area, relief function is activated and flow is relieved from C2 to V2. With pilot pressure at V1-C1, the pressure setting is reduced in proportion to the stated ratio of the valve,until opening and allowing flow from C2 to V2. The spring chamber is drained to V2, and any back-pressure at V2 is additive to the pressure setting in all functions.
Note: port identified with M are not protected with calibrated orifice but in direct connection with pressure channels.
描述
當V2處的壓力上升到高于彈簧偏置壓力時,止回閥座被推離活塞,并允許從V2到C2的流量。 當C2處的負載壓力上升到壓力設定值以上時,將激活直接操作的差動面積,溢流功能,并且流量將從C2釋放到V2。 在先導壓力為V1-C1的情況下,壓力設定值與閥的規定比例成比例地降低,直到打開并允許從C2到V2的流量。 彈簧腔排空至V2,并且在V2處的任何背壓都會增加所有功能中的壓力設置。
注意:標記為M的端口沒有經過校準的節流孔保護,而是與壓力通道直接連接。
REXROTH OIL CONTROL閥08.39.59-X-Y-Z系列其他常見型號:
REXROTH OIL CONTROL 083959030220000 R930006757
REXROTH OIL CONTROL 083959030235000 R930006443
REXROTH OIL CONTROL 083959030320000 R930006758
REXROTH OIL CONTROL 083959030335000 R930006759
REXROTH OIL CONTROL valve NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年,定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣,液壓以及氣動解決方案的合作伙伴,我們利用我們的全球協作團隊,為客戶提供先進解決方案,市場知識以及相關增值服務來幫助優化客戶的工作效率,提高可靠性和安全性,致力于成為工業產品和解決方案的優質渠道。
如果有任何關于REXROTH OIL CONTROL閥083959030335000 R930006759的疑問,請隨時與我們溝通(021-31006702)。我們將盡全力解決您的問題。
If you have any question for REXROTH OIL CONTROL products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: jjxdch.cn.
REXROTH OIL CONTROL閥083959030335000 R930006759技術數據