德國HUNGER桿密封TDI系列描述及作用
The Hunger TDI tandem seal for inside sealing is a piston rod seal.
It can be used with mineral oils and in modified form with water base fluids,
fire resistant fluids and compressed air.
The TDI seal consists of 2 parts, an external elastic ring of PUR with a sealing lip and an internal slide ring of abrasion resistant PTFE-Bronze compound with a
sealing edge. Prior to fitting, the sealing lip protrudes beyond the nominal diameter of the seal and when fitted is pressed against the piston rod. Effective sealing is thereby provided at zero pressure.
The slide ring is surrounded by the elastic ring and seals axially in direct contact with the piston rod. Under increasing pressure and compression of the sealing
ring, it is the slide ring which is predominantly pressed against the piston rod. The slide ring produces an annular cavity where any seepage oil that has passed
the elastomer lip is collected.
The seepage oil is held back by the sealing edge such that the emerging piston rod remains dry. During there turn stroke, the collected oil is forced back into the
cylinder.
The internal sealing surface of the seal primarily comprises the internal slide ring which possess excellent sliding properties. When combined with a surface finish
of Ra 0.1 - 0.3 μm on the piston rod, minimum frictionlevels are achieved with highly efficient sealing and long service life. There is no stiction, no unacceptable
heat generation, and above all no stick-slip effect.
Hunger TDI系列密封屬于桿密封。它可以與礦物油一起使用，并且可以與水基液體，防火液體和壓縮空氣一起使用。TDI密封由兩部分組成，一個帶密封唇的PUR外部彈性環和一個帶耐磨PTFE復合材料的內部滑環密封邊緣。在配合之前，密封唇突出超過密封件的公稱直徑，并且當被壓靠在活塞桿上時。由此，在零壓力下提供有效的密封。
滑環產生一個環形腔，任何滲出的油都通過彈性體唇部被收集。滲漏油被密封邊緣阻擋，使得出現的活塞桿保持干燥。在那里轉彎時，被收集的油被迫回到了圓筒。
密封件的內密封面主要由內滑環組成，具有良好的滑動性能。與表面結合使用時在活塞桿上的Ra為0.1-0.3μm，實現了最小的摩擦等級，密封效率高，使用壽命長。沒有停滯，最重要的是沒有粘滑效應。
德國HUNGER桿密封TDI系列不同尺寸描述圖
愛澤工業(IZE INDUSTRIES)特價經銷、常用備件型號：
HUNGER桿密封TDI 75*85*12
HUNGER桿密封TDI 36*44*8
HUNGER桿密封TDI 45*55*10
HUNGER桿密封TDI 75/90*12
HUNGER桿密封TDI 50/60*10
HUNGER桿密封TDI 60/75*12
HUNGER桿密封TDI 60*75*16
HUNGER桿密封TDI 600/640*25
HUNGER桿密封TDI(NBR)90/105*12
HUNGER桿密封TDI(NBR)70/85*12
HUNGER桿密封TDI125*145*16
HUNGER桿密封TDI 140/155*17
HUNGER桿密封TDI 70/85*12
HUNGER桿密封TDI 30/38*7
HUNGER桿密封TDI 40/48*8
HUNGER桿密封TDI 28/36*7
HUNGER桿密封TDI (NBR) 90/105x12
HUNGER桿密封TDI (NBR) 70/85x12
HUNGER防塵封AI系列 示例AI-S100/112*12 039194
HUNGER桿密封TDT系列 示例TDT100/108*11.5 010239
HUNGER桿密封TDI系列 示例TDI55/65*10010021
HUNGER活塞密封TDMA系列 示例TDMA105/95*15 010423
HUNGER軸封FI系列 示例FI90*24 012036
HUNGER軸封FAI系列 示例FAI70*24 011928
HUNGER活塞密封GD1000K系列 示例GD1000K220/195x71 137720
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的首選渠道。
如果有任何關于德國HUNGER桿密封TDI系列的疑問，請隨時與我們聯系，（021-3100 6702），我們將盡全力解決您的問題。
有關德國HUNGER桿密封更詳細的信息或者購買德國HUNGER相關產品，請聯系愛澤工業。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
