美國DYNAPAR編碼器 示例HS2020488444213尺寸圖及選型參數表
美國DYNAPAR編碼器HS2020488444213參數說明
STANDARD OPERATING CHARACTERISTICS
Code: Incremental, Optical
Resolution: 50 to 2540 PPR (pulses/revolution)
Accuracy: (worst case any edge to any other
edge) <1024 PPR (metal disk): ±7.5 arc-min.
≥1024 PPR (glass disk): ±2.5 arc-min.
Format: Two channel quadrature (AB) with
optional Index (Z) and complementary outputs
Phase Sense: A leads B for CCW shaft rotation
viewing the hub clamp end of the encoder
Quadrature Phasing: 90° ± 22.5° electrical
Symmetry: 180° ±18° electrical
Index: 180° +18°/-135° electrical (gated with Blow)
Waveforms: Squarewave with rise and fall times
less than 1 microsecond into a load capacitanceof 1000 pf
ELECTRICAL
Input Power:
5 to 26 VDC at 100 mA max., not including outputloads
Outputs:
7272 Push-Pull: 40mA, sink or source
7272 Differential Line Driver: 40 mA, sink or source
7273 Open Collector: 40mA, sink max
Frequency Response: 100 kHz min. (index
75 kHz min. for extended temperature range)
Noise Immunity: Tested to EN61326-1
Electrical Immunity: Reverse polarity and short
circuit protected
Termination: MS Connector, M12 Connector,
Cable Exit
Mating Connector:
6 pin, style MS3106A-14S-6S (MCN-N4);
7 pin, style MS3106A-16S-1S (MCN-N5);
10 pin, style MS3106A-18-1S (MCN-N6);
10 pin, NEMA4 style (MCN-N6N4)
Cable w/ 5 pin M12 Connector (112859-xxxx)
Cable w/ 8 pin M12 Connector (112860-xxxx)
SERIES HS20 Dynapar? brand
Sealed Hollowshaft Encoder
? Hollowshaft Design Eliminates Brackets
and Couplings
? Electrically Isolated Shaft Design
? Compact Size for Tight Mounting
Constraints
MECHANICAL
Bore Diameter: 6mm to 16 mm, 1/4” to 5/8”
Shaft Speed: 6000 RPM max.
Shaft Bore Tolerance: Nominal
+0.0002”/+0.0008” (+0.005/+0.020 mm)
Mating Shaft Requirements:
Runout: ±0.005” (±0.13mm) radial, max.
Endplay: ±0.050” (±1.27 mm) axial, max.
Length: 0.80” (20 mm), minimum
Starting Torque: 3.0 oz-in max.
Moment of Inertia: 5.1 x 10-4 oz–in–sec2
Housing and Cover: Aluminum
Disc Material: Glass or Metal (PPR Dependant)
Weight: 10 oz. max.
ENVIRONMENTAL
Operating Temperature:
Standard: 0 to +70° C
Extended: 0 to +85° C
Storage Temperature: –40 to +85° C
Shock: 50 G’s for 11 milliseconds duration
Vibration: 5 to 2000 Hz at 2.5 G’s
Humidity: to 98% without condensation
Enclosure Rating: NEMA4/IP65 (dust proof,washdown)
美國DYNAPAR編碼器HS2020488444213等常用型號匯總
愛澤工業(IZE INDUSTRIES)特價經銷、常用備件型號：
DYNAPAR編碼器HS20005013121
DYNAPAR編碼器HS20005040000
DYNAPAR編碼器HS20005040017
DYNAPAR編碼器HS20005043017
DYNAPAR編碼器HS20005043442
DYNAPAR編碼器HS20005045005
DYNAPAR編碼器HS2000505001C
DYNAPAR編碼器HS200050654BD
DYNAPAR編碼器HS2000507010H
DYNAPAR編碼器HS2000507044J
DYNAPAR編碼器HS20005073010
DYNAPAR編碼器HS20005073120
DYNAPAR編碼器HS20005073121
DYNAPAR編碼器HS20005073220
DYNAPAR編碼器HS20005083000PS
DYNAPAR編碼器HS2000508300D
DYNAPAR編碼器HS20005083345
DYNAPAR編碼器HS20005084000PS
DYNAPAR編碼器HS20005093342
DYNAPAR編碼器HS200050A0000
DYNAPAR編碼器HS200050B044A
DYNAPAR編碼器HS2000601310D
DYNAPAR編碼器HS20006013117
DYNAPAR編碼器HS200060203BA
DYNAPAR編碼器HS200060203BB
DYNAPAR編碼器HS20006023340
DYNAPAR編碼器HS20006030000
DYNAPAR編碼器HS20006043010
DYNAPAR編碼器HS2000605322D
DYNAPAR編碼器HS2000606140D
DYNAPAR編碼器HS2000606301B
DYNAPAR編碼器HS2000607002B
DYNAPAR編碼器HS20006073000
DYNAPAR編碼器HS20006073010
DYNAPAR編碼器HS20006073205
DYNAPAR編碼器HS20006073211
DYNAPAR編碼器HS2000607344D
DYNAPAR編碼器HS200060744B7
DYNAPAR編碼器HS20006080005
DYNAPAR編碼器HS20006081000
DYNAPAR編碼器HS2000608101H
DYNAPAR編碼器HS20006081115
DYNAPAR編碼器HS20006081341
DYNAPAR編碼器HS20006081432
DYNAPAR編碼器HS2000608301D
DYNAPAR編碼器HS2000608311C
DYNAPAR編碼器HS20006083120
DYNAPAR編碼器HS20006083121PS
DYNAPAR編碼器HS20006083125
DYNAPAR編碼器HS20006083125PS
DYNAPAR編碼器HS2000608312B
DYNAPAR編碼器HS20006083200
DYNAPAR編碼器HS200060833B6PS
DYNAPAR編碼器HS2000608400A
DYNAPAR編碼器HS200060844B7
DYNAPAR編碼器HS20006093015
DYNAPAR編碼器HS200060B012A
DYNAPAR編碼器HS2001001533J
DYNAPAR編碼器HS2001003122D
DYNAPAR編碼器HS20010040001
DYNAPAR編碼器HS20010041222
DYNAPAR編碼器HS20010043001
DYNAPAR編碼器HS20010043115
DYNAPAR編碼器HS2001004533J
DYNAPAR編碼器HS20010053226
DYNAPAR編碼器HS20010053347
DYNAPAR編碼器HS2001006010B
DYNAPAR編碼器HS20010064336
DYNAPAR編碼器HS2001006533J
DYNAPAR編碼器HS20010070110
DYNAPAR編碼器HS20010073100PS
DYNAPAR編碼器HS20010073331PS
愛澤工業專業提供美國DYNAPAR編碼器HS2020488444213等，美國DANAHER集團旗下全系列產品，DYNAPAR重載編碼器，HENGSTLER編碼器/NORTHSTAR（北極星）HSD351024PA4，HSD351024PA7編碼器等等。
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的首選渠道。
如果有任何關于美國DYNAPAR編碼器HS2020488444213的疑問，請隨時與我們聯系，（021-3100 6702），我們將盡全力解決您的問題。
有關美國DYNAPAR編碼器HS2020488444213更詳細的信息或者購買美國DYNAPAR編碼器HS2020488444213相關產品，請聯系愛澤工業。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website:jjxdch.cn.
美國DYNAPAR編碼器HS2020488444213外觀尺寸及參數選型
