愛澤工業2023年1月部分到貨產品專題及庫存
——USA TOLERANCE RING公差環篇
如下為我司愛澤工業IZE_Industries本月到貨USA TOLERANCE RING相關產品，歡迎致電索取樣本資料和產品信息。
USA TOLERANCE RING公差環BN55X10S
USA TOLERANCE RING公差環AN85X19
USA TOLERANCE RING公差環AN85X19S
USA TOLERANCE RING公差環BN35X17S
USA TOLERANCE RING公差環BN150075S
USA TOLERANCE RING公差環AN系列介紹
AN系列有朝內的波紋。AN系列在自由狀態下是“打開的”，因此當安裝在孔內時，環將符合該孔并且是自固定的。如果與居中或半居中布置一起使用，則在裝配配套機器部件期間無需進一步處理環。當與自由布置一起使用時，環必須在配套機器部件的組裝過程中得到軸向支撐。
AN系列被剪裁成一定長度，以適應“標稱”周長之外的尺寸。使用 AN 型的示例包括安裝軸承外圈，或?qū)L(fēng)扇或皮帶輪安裝到普通英制或公制直徑的軸上。
AN rings have corrugations that face inward. The style ring is “open” in the free state so that when installed inside a bore the ring will conform to that bore and be self retaining. If used with the centered or half-centered arrangement no further handling of the ring is necessary during assembly of the mating machine parts. When used with the free arrangement, the ring must be supported axially during assembly of the mating machine parts.
The AN style is cut to length so as to fit outside a “nominal” circumference. Examples for use of the AN style include mounting a bearing outer race, or mounting a fan or pulley to a shaft of common inch or metric diameter.
USA TOLERANCE RING公差環BN系列介紹
BN 型環的自由狀態直徑小于它們要安裝在其上的軸直徑，因此當安裝到軸上時，環符合并在軸上自固定。如果與居中或半居中布置一起使用，環將卡入凹槽中，無需進一步處理環。如果與自由布置一起使用，則在配合部件的組裝過程中必須對環進行軸向支撐。
BN 環被切割以適合標稱圓周。BN 環的使用示例包括將軸承內圈安裝到軸上，或者在其中修改軸比修改外部構件的孔更實用的組件。
BN style rings have a free-state diameter smaller than the shaft diameter over which they are to be installed, so that when mounted to the shaft the rings conform to and become self-retaining on the shaft. If used with the centered or half-centered arrangement, the ring will snap into the groove and no further handling of the ring is necessary. If used with the free arrangement, the ring must be axially supported during assembly of the mating parts.
The BN ring is cut to fit inside a nominal circumference. Examples for use of the BN ring include mounting a bearing inner race to a shaft, or assemblies in which modification of the shaft is more practical than modifying the bore of the outer member.
USA TOLERANCE RING公差環ANL系列介紹
ANL型可以描述為非常輕便的AN型公差環。這種環的特征通常是在自由狀態下不具有圓形形狀。ANL 環的波紋也向內，是 AN 環的輕型版本。使用的材料非常薄，因此 ANL 環在自由狀態下不會保持圓形。這些輕型環主要用于安裝力必須絕對保持在最低限度的地方，以及環承受低徑向載荷的地方。
The ANL style may be described as a very light duty AN style ring. It is often characteristic of this ring to not have a circular shape in the free state. ANL rings have corrugations that also face inward and are light-duty versions of AN rings. The material that is used is very thin, so ANL rings do not maintain a circular shape in their free state. These light duty rings are used primarily where installation forces must absolutely be kept to a minimum and where the ring will see low radial loads.
USA TOLERANCE RING公差環常用型號：
USA TOLERANCE RING AN85X19S
USA TOLERANCE RING BN55X10S
USA TOLERANCE RING AN85X19
USA TOLERANCE RING BN150075S
USA TOLERANCE RING BN35X17S
USA TOLERANCE RING BN125075S
USA TOLERANCE RING BN137068S
USA TOLERANCE RING BN45X10S
USA TOLERANCE RING BN150075S
USA TOLERANCE RING BN40X14S
USA TOLERANCE RING BN162100S
USA TOLERANCE RING BN175100S
USA TOLERANCE RING BN200100S
USA TOLERANCE RING BN6X6S
USA TOLERANCE RING BN10X7S
USA TOLERANCE RING BN12X5S
USA TOLERANCE RING AN110X25S9
USA TOLERANCE RING AN120X22S9
USA TOLERANCE RING AN120X25S9
USA TOLERANCE RING AN125X22S9
USA TOLERANCE RING AN130X25S9
USA TOLERANCE RING AN130X31S9
USA TOLERANCE RING AN140X25S9
USA TOLERANCE RING AN140X33S9
USA TOLERANCE RING AN150X25S9
USA TOLERANCE RING AN150X33S9
USA TOLERANCE RING AN160X25S9
USA TOLERANCE RING AN160X33S9
USA TOLERANCE RING AN170X39S9
USA TOLERANCE RING AN180X39S9
USA TOLERANCE RING AN190X39S9
如果您需要完整的USA TOLERANCE RING的相關技術咨詢，請隨時致電愛澤工業（021-3100 6702），或者訪問網站jjxdch.cn,我們將盡全力解決您的問題。
If you have any question for USA TOLERANCE RING，please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：jjxdch.cn
