關于3M拋光帶丨研磨卷介紹
3M氧化鋁研磨卷254X, 261X, 262X, 263X, 265X, 266X, 268X, 264M產品介紹
3M? Lapping Film Aluminum Oxide 254X, 261X, 262X, 263X, 265X, 266X, 268X, 264M
產品描述
緊密分級的氧化鋁礦物漿料涂在聚酯薄膜背襯上?？墒褂没虿皇褂?PSA（壓敏粘合劑）。
Product Description
Tightly graded aluminum oxide minerals slurry coated onto a polyester film backing. Available with or without PSA (Pressure Sensitive Adhesive).
應用
光纖連接器拋光、平面研磨、超精加工、磁頭精加工、硬盤驅動潤滑拋光。
Applications
Fiber optic connector polishing, flat lapping, superfinishing,media head finishing, hard disk drive lube buff.
主要特點
– 產生出色的表面光潔度
– 減少整體處理時間
– 產量高
– 非漿料加工
Key Features
– Produces excellent surface finish
– Reduces overall process time
– Produces high yields
– Non-slurry processing
轉換形式（片，盤，卷），最大寬度26”
Converted Forms Sheets, Discs and Rolls. Maximum width 26"
背材：聚脂薄膜，標準厚度：2mil 和 3mil
Backing Polyester Film Nominal thickness: 2 and 3 mil.
產品內徑及礦物粒度等級表
儲存和保質期
推薦的儲存條件：溫度：50-90°F；相對濕度：30-70%
（不會隨時間減退。但建議產品最好在購買后24個月內使用。）
Storage and Shelf Life
Recommended Storage Conditions:
Temperature: 50-90°F Relative humidity: 30-70%
(There is no degradation with time. It is recommended that
product be used within 24 months of purchase.)
3M氧化鋁拋光帶362L/272L（卷）介紹
3M 362L 和 3M 272L 卷
常見轉換：50mm、100mm 和 200mm x 50m
可用等級：80、60、40、30、20、15 和 9 micron
描述：微米級氧化鋁樹脂粘合到 3ml 或 5ml 聚酯薄膜背襯上。封閉涂層磨料表面涂有干潤滑劑以抵抗負載。
應用：主要用于工業氣缸/輥精加工和凸輪和曲軸微精加工。
機器系統：主要與專用的微精加工單元結合使用。在 AOEM 工廠中，可與各種輥寬或車床超精加工機（通常具有 75 毫米芯）一起使用。
3M 362L & 3M 272L Rolls
Common Conversions: 50mm, 100mm & 200mm x 50m
Grades Available: 80, 60, 40, 30, 20, 15 & 9 micron
Description: Micron graded aluminium oxide resin bonded to a 3ml or 5ml polyester film backing. Closed coat abrasive surface is coated with a dry lubricant to resist loading.
Applications: Used primarily for industrial cylinder / roll finishing and cam & crank shaft microfinishing.
Machine Systems: Primarily used in conjunction with a dedicated microfinishing unit. In AOEM plants, can be used with a variety of roll widths or a Lathe Superfinisher (typically with 75mm cores).
3M其它微精氧化鋁拋光膜對應選型表
3M常見高性能磨料應用
3M Trizact? 邊緣精加工和平面研磨產品組合及應用
Trizact? Edge Finishing and Flat Lapping Portfolio
下一篇：常用拋光工藝及拋光公差等級對照表
