閥門密封劑介紹（中英文）
什么是閥門密封劑？ / What is Valve Sealant?
在閥口周圍形成靈活的可再生密封。
每個潤滑旋塞閥的組成部分。
抵抗線路介質的化學侵蝕和溶解特性。
結合基礎油、增稠劑和添加劑。
Forms a flexible renewable seal around the valve port.
An integral part of every lubricated plug valve.
Resists chemical attack and dissolving characteristics of line medium.
Combines base oils, thickeners and additives.
為什么要使用閥門密封劑？ / Why Use Valve Sealants?
緊密密封 – 為了確保絕對緊密的密封，密封劑的薄膜在閥門的密封表面之間形成密封。 密封由密封劑形成，密封劑通過閥口周圍的通道系統傳輸。 通過為客戶的特定服務選擇適當?shù)拿芊鈩梢栽诤軐挼臏囟群蛪毫Ψ秶鷥?nèi)保持密封。
Drop-Tight Seal – To secure an absolutely tight seal, the film of the sealant works to form a seal between the sealing surfaces of the valve. The seal is formed by sealant transmitted through a system of passageways around the valve port. With proper selection of sealant for your particular service, the seal can be retained over a wide range of temperatures and pressures.
潤滑 – 通過覆蓋軸承不規則處來防止閥門密封服務的金屬與金屬接觸。 無論金屬表面研磨得多么精細，金屬都是一系列的峰谷。 當一種金屬相對于另一種金屬滑動時，會產生摩擦，并可能導致粘附、剪切或犁溝。 軸承區域上的密封劑保護膜可防止金屬與金屬之間的摩擦。
Lubrication – Prevents metal-to-metal contact of the valve sealing services by filming over bearing irregularities. No matter how finely ground a metal surface may be, the metal is a series of peaks and valleys. As one metal slides against another, friction is set up and adhesion, shearing, or plowing may result. A protective film of sealant over the bearing area prevents metal-to-metal rubbing.
可更換閥座 – 無需拆卸潤滑閥或停止使用即可更換輕度損壞的閥座。 密封劑作為潤滑閥的結構部分，提供了一個靈活且可更換的閥座，消除了強制配合接觸以實現密封的必要性。 為此，密封劑不僅必須具有適當?shù)目伤苄?，而且還必須具有耐溶劑和化學品等管線流體的能力。 即使在壓力下，密封劑也能在閥門的密封表面之間形成密封。
Renewable Seat – There is no need to disassemble a lubricated valve or remove it from service to replace mildly damaged seats. Sealant, as a structural part of lubricated valves, provides a flexible and renewable seat, eliminating the necessity of force fit contact to effect a seal. For this purpose, the sealant not only must have proper plasticity, but also resistance to line fluids such as solvents and chemicals. Sealant forms a seal between the sealing surfaces of the valve even under pressure.
旋塞頂升 – 傳統潤滑旋塞閥設計的基本工作原理在于帕斯卡定律的應用。 該定律指出，施加到密封容器中液體的單位壓力會以不減力的方式傳遞到液體的每個部分，從而使力成倍增加，具體取決于容器內部的面積。 在密封劑注入產生的壓力下，密封劑提供液壓裝置，以便在需要用力來釋放塞子時將塞子從其錐形座中提起。
Plug Jacking – The fundamental operating principle of the traditional lubricated plug valve design lies in the application of Pascal‘s Law. The law states that a unit pressure applied to the liquid contained in a sealed vessel is transmitted to every part of the liquid with undiminished force, thus multiplying the force many times, depending on the area of the interior of the vessel. The sealant, under pressure developed by sealant injection, supplies the hydraulic means for lifting the plug from its tapered seat when and if that force is needed to free the plug.
耐腐蝕 – 有助于防止閥門內部腐蝕。
Corrosion Resistance – Helps prevent corrosion of valve internals.
聲明：
- 文章轉載自網絡，由愛澤工業翻譯，如有侵權，請聯系刪除！
- 如有偏頗，歡迎指正！
