愛澤工業2024年5月部分到貨產品專題及庫存
——RYUKI篇
如下為我司愛澤工業IZE_Industries本月到貨RYUKI相關產品，歡迎致電索取樣本資料和產品信息。
RYUKI流量計ODM-300SDR FMR32559
RYUKI流量計ODM-300S·TD FMR40209
RYUKI流量計ODM-300S·TD FMR40211
RYUKI流量計ODM-300·TD FMR40210
RYUKI流量計ODM-300系列介紹及選型
該流量計在管道中設有節流機構（孔板），通過孔口的入口和出口之間的壓差檢測流量的變化，并在指示器上顯示瞬時流量。
特征
1. 尺寸緊湊，便于搬運和管道安裝。
2. 流量指示為機械操作。 指示穩定、易于恢復
3. 指示器的受壓部分采用隔膜（帶布的特殊橡膠），因此在耐酸性和耐化學性方面優越，在強度和耐熱性方面適合一般用途。
4、指示器的機械部分處于空氣中，不易被流體腐蝕。
5、指示器內可集成帶有微動開關的電接點，不僅可以指示流量，還可以傳輸報警信號。
6、流量指示器與差壓檢測器水平距離約100m時即可測量，可實現遠距離指示。
7、一臺探測器可安裝多個指示器，可用于現場指示、遠程指示等多種用途。
8、通過更換刻度板和節流機構（孔板）即可輕松改變流量范圍。
9. 探測器前后必須有直管部分。
(1) 入口側：長度為管道內徑的10倍或以上。
(2) 出口側：長度為管道內徑的5倍以上。
Provided with a throttling mechanism (orifice plate) in piping, this flowmeter detects changes in the flow rate by differential pressure between the inlet and outlet of the orifice and indicates an instantaneous flow rate on its indicator.
Features
1. Being compact in size, it is easy to handle and install in piping.
2. Flow rate indication is operated mechanically. Indication is stable and easy to restoring
3. A diaphragm (special rubber with cloth) is used for the pressure-receiving portion of the indicator and so it is superior in terms of acid and chemical resistance and is suitable for general use in terms of strength and thermal resistance.
4. The mechanical part of the indicator is in the air and so it is hard to be corroded by fluid.
5. An electric contact with a microswitch can be integrated in the indicator, and so not only a flow rate indication but also an alarm signal can be transmitted.
6. Measurement is possible when the flow rate indicator is about 100 m horizontally apart from the differential pressure detector, and so remote indication can be made.
7. Multiple indicators can be installed for one detector and therefore, it can be used for indication at the site, for remote indication and for other purposes.
8. The flow rate range can be made easily changed by replacing the scale plate and throttling mechanism (orifice plate).
9. Straight piping portions must be present before and after the detector.
(1) Inlet side: Length of 10 times or more the inner diameter of piping.
(2) Outlet side: Length of 5 times or more the inner diameter of piping..
RYUKI流量計ODM-LP200L系列介紹
這是一種孔板式流量計，其結構緊湊，適用于一般工業用水、自來水等。與傳統的面積式和旁通式流量計相比，由于生銹、污垢等原因造成的讀數錯誤和故障較少。
由于這是差壓式流量計，因此孔板前后均需有直管。
?入口側（高壓側）：配管內徑的10倍以上
?出口側（低壓側）：配管內徑的5倍以上
This is an orifice type flow meter that has been developed to be compact and suitable for general industrial water, tap water, etc. Compared to conventional area type and bypass type flowmeters, there are fewer reading errors and failures due to rust, dirt, etc.
Since this is a differential pressure flowmeter, a straight pipe is required before and after the orifice.
?Inlet side (high pressure side): 10 times or more the inner diameter of the pipe
?Outlet side (low pressure side): 5 times or more the inner diameter of the pipe
RYUKI流量計EM3系列介紹
這是一款電子差壓流量計，將先進的技術和豐富的功能融入到緊湊的機身中。它的受壓部分采用金屬膜片，因此具有可承受高管路壓力的結構。可以從左側或右側接線的 2 線流量計。它還具有防水結構，可以承受暫時的洪水。可方便地安裝在接線中間，用于現場指示和遠程傳輸。
它還可以與ODM-300指示器部分一起使用。如果將其連接到分配器，接線會更容易。另外，EM3型系列受壓面積大、精度高、響應速度快。
This is an electronic differential pressure flowmeter that packs advanced technology and a wealth of functions into a compact body.It uses a metal diaphragm in the pressure receiving part, so it has a structure that can withstand high line pressure. A 2-wire flowmeter that can be wired from either the left or right side. It also has a waterproof structure that can withstand temporary flooding. It can be easily installed in the middle of wiring for on-site instructions and remote transmission.
It can also be used together with the ODM-300 indicator section. Wiring is easier if you connect it to a distributor. In addition, the EM3 type series has a large pressure receiving area, high precision, and fast response speed.
RYUKI流量計常用型號：
RYUKI ODM-300S.TD
RYUKI MGPS ODM-300ST
RYUKI ODM-300ST
RYUKI ODM-300SDR FM41774
RYUKI ODM-300SDR 425978
RYUKI ODM-300S·TD FMR00197
RYUKI ODM-300 TD FMR00198
RYUKI ODM-300-TDSFMR00208
RYUKI ODM-300SDR JIS10K200A
RYUKI ODM-300SDR FMA92806
RYUKI ODM-300SDR FMN80402
RYUKI ODM-300SDR TIS10K200A
RYUKI ODM-300DR
RYUKI ODM-300SDR FMN02740-6
RYUKI ODM-300SDR FMNO2740-6
RYUKI ODM300-S-T FM-12182
RYUKI ODM-300S-TD FMN82393
RYUKI ODM-300-TD FMN82394
RYUKI LV2005S FM50899
RYUKI ODM-300-S-DR-10K150A
RYUKI ODM-300-DR-10K150A
RYUKI ODM-300-S-ST-5K40A
RYUKI ODM-300-ST-5K40A
RYUKI ODM-300-S-ST-150A-10K-2500-BC
RYUKI ODM-300-S-DR-150A-10K-2500-BC
RYUKI ODM-300-S2-ST-150A-10K-2500-BC
RYUKI ODM-300-S2-DR-150A-10K-2500-BC
RYUKI ODM-300-S-ST-150A-10K-500-BC
RYUKI ODM-300-S-DR-150A-10K-500-BC
RYUKI ODM-300-S2-ST-150A-10K-500-BC
RYUKI ODM-300-S2-DR-150A-10K-500-BC
RYUKI LV2005S
RYUKI LV2005
RYUKI ODM-7000S2DR
RYUKI ODM-7000SDR
RYUKI ODM-7000DR
RYUKI ODM-7000S2ST
RYUKI ODM-7000SST
RYUKI ODM-7000ST
如果您需要完整的RYUKI的相關技術咨詢，請隨時致電愛澤工業（021-3100 6702），或者訪問網站jjxdch.cn,我們將盡全力解決您的問題。
If you have any question for RYUKI，please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：jjxdch.cn
