愛澤工業2023年11月部分到貨產品專題及庫存
——HUNGER篇
如下為我司愛澤工業IZE_Industries本月到貨HUNGER相關產品，歡迎致電索取樣本資料和產品信息。
HUNGER密封FI 50x19
HUNGER密封GD1000K 85x67x43
HUNGER密封TDI 50x60x10
HUNGER密封TDI 220x240x16
HUNGER密封TDT 100x108x11.5
HUNGER密封AI 100/112x12
HUNGER密封FI系列介紹
HUNGER FI型密封主要用于活塞桿。它提供桿和殼體之間的導向和支承表面，并防止金屬與金屬之間的接觸。
FI由非常耐磨和低摩擦的POM-PTFE Bronze復合物組成。它可以用于礦物油基液壓油，水油乳液和耐火流體以及壓縮空氣。
它有一個U形的橫截面，并與有角度的對接接頭分開。它可以螺旋地向內壓縮以便裝配到桿殼體中，在那里彈回到相應的安裝槽中。軸承槽布置將其固定以防止軸向移動。
HUNGER FI型密封可以用作彼此相鄰排列的單環或多環。
Hunger bearing ring type FI is mainly used on piston rods. It provides guiding and bearing surfaces between rod and housing and prevents metal to metal contact between them.
The FI consists of an extremely abrasion-resistant and low-friction POM-PTFE Bronze compound. It can be used for hydraulic oil with a mineral oil base, for water-oil emulsions and for fire-resistant fluids as well as compressed air.
It has a U-shaped cross-section and is split with an angled butt joint. It can be spirally compressed inwards for fitting into the rod housing where it springs back out into corresponding installation grooves. The bearing groove arrangement secures it against axial movement.
The Hunger bearing rings can be used as single rings or multiple rings arranged adjacent to each other. The number of bearing rings depends on the expected side loads. The butt joints in adjacent bearings should be staggered.
Due to its excellent dry running properties the bearing ring FI can also be applied behind a rod seal opposite the pressure side.
HUNGER密封GD1000K系列介紹
HUNGER GD1000K型滑環活塞密封件用于密封和引導雙作用液壓缸上的活塞。 密封設計和使用的材料使其特別適合更劇烈的應用，例如工程機械油缸。
根據材料版本，可以密封各種液壓油。
該密封件可以標準形式與礦物油和水基液體一起使用。 修改后的版本可與其他流體一起使用。
GD1000K由六部分組成，一個改性NBR異形彈性環，一個起密封圈作用的耐磨PTFE青銅化合物滑環，兩個改性PUR側向支撐環和兩個耐壓軸承環 POM-化合物。
The HUNGER slide ring piston seal type GD1000K is used to seal and guide pistons on double-acting hydraulic cylinders. The seal design and materials used make it particularly suitable for the most vigorous applications e.g. construction machine cylinders.
Depending on material version all kinds of hydraulic fluids can be sealed.
The seal can be used in standard form with mineral oils and water based fluids. Modified versions are available for use with other fluids.
The GD1000K consists of 6 parts, a special shaped elastic ring of a modified NBR, a slide ring of abrasion resistant PTFE-Bronze-Compound which acts as the sealing ring, two lateral support rings of modified PUR and two bearing rings of pressure-resistant POM-Compound.
HUNGER密封TDI系列介紹
用于內部密封的 HUNGER TDI 串聯密封件是活塞桿密封件。
它可以與礦物油一起使用，也可以以改性形式與水基液體、耐火液體和壓縮空氣一起使用。
TDI 密封件由兩部分組成：帶密封唇的 PUR 外部彈性環和帶密封邊緣的耐磨 PTFE 青銅化合物內部滑環。 安裝前，密封唇突出超過密封件的標稱直徑，安裝后壓在活塞桿上。 由此在零壓力下提供有效的密封。
The HUNGER TDI tandem seal for inside sealing is a piston rod seal.
It can be used with mineral oils and in modified form with water base fluids, fire resistant fluids and com- pressed air.
The TDI seal consists of 2 parts, an external elastic ring of PUR with a sealing lip and an internal slide ring of abrasion resistant PTFE-Bronze-Compound with a sealing edge. Prior to fitting, the sealing lip protrudes beyond the nominal diameter of the seal and when fitted is pressed against the piston rod. Effective sealing is thereby provided at zero pressure.
HUNGER密封TDT系列介紹
TDT 型 HUNGER 串聯密封設計用于與伸縮氣缸配合使用。 它可以與礦物油或壓縮空氣一起使用。
TDT 密封件采用 PUR 制造，內部有兩個密封唇。 在安裝之前，這些唇緣突出超過密封件的標稱直徑。 安裝后，密封壓縮迫使唇部抵住伸縮缸級，從而在零壓力下提供密封功能。
The HUNGER tandem seal type TDT is designed for use with telescopic cylinders. It can be used with mineral oils or compressed air.
The TDT seal is manufactured in PUR and has two sealing lips on the inside. Prior to fitting, these lips protrude beyond the nominal diameter of the seal. Following installation, seal compression forces the lips against the telescopic cylinder stages, thereby providing a sealing function at zero pressure.
HUNGER 防塵圈Al系列介紹
HUNGER 防塵圈 Al 型具有阻擋極細灰塵、金屬顆粒、沙粒等的功能，這樣其后面的軸承元件和密封件就不會因污染物進入而過早磨損。
Al 刮水器可與礦物油和許多其他類型的液壓油一起使用。
特殊版本可在高環境溫度下使用。
必須小心確保雨刮器內部不會積聚壓力，包括潤滑脂壓力。
The HUNGER wiper ring type Al has the function to keep out extremely fine dust, metal particles, grains of sand etc. such that the bearing elements and seals behind it are not subjected to premature wear as a result of contaminant ingress.
The Al wiper can be used with mineral oils and many other types of hydraulic fluid.
Special versions are available for use at high ambient temperatures.
Care must be taken to ensure that there is no pressure build-up, including grease lubricant pressure, on the inside of the wiper.
HUNGER密封常用型號：
HUNGER FI 32
HUNGER FI 40*19
HUNGER FI 50x56x19
HUNGER FI 60*24
HUNGER FI 60/71X3.9
HUNGER FI 65/76X3.9
HUNGER FI 70x24
HUNGER FI 90x24
HUNGER FI 130*24
HUNGER FI 140×24
HUNGER FI 250*33
HUNGER FI 320*35
HUNGER GD1000K 50*34*32
HUNGER GD1000K 63/47*39
HUNGER GD1000K 70*54*32
HUNGER GD1000K 70/54*39
HUNGER GD1000K 85*67*22.5/43
HUNGER GD1000K 150/128x53
HUNGER GD1000K 180/158*57
HUNGER GD1000K 200/175*64
HUNGER GD1000K 220/195*71
HUNGER GD1000K 280/255*85
HUNGER GD1000K 330*300*80
HUNGER GD1000K 350/320*80
HUNGER GD1000K 420*390*80
HUNGER GD1000K 440*410*80
HUNGER GD1000K 450*80
HUNGER GD1000K 500/470*80
HUNGER GD1000K 540/510/80
HUNGER GD1000K 750/720*80
HUNGER GD1000k 900/870/80
HUNGER TDI 28/36*7
HUNGER TDI 30/38*7
HUNGER TDI 36*44*8
HUNGER TDI 40/48*8
HUNGER TDI 45*55*10
HUNGER TDI 50/60*10
HUNGER TDI 60/75*12
HUNGER TDI 60*75*16
HUNGER TDI 70/85x12
HUNGER TDI 75*85*12
HUNGER TDI 90/105*12
HUNGER TDI 95*110*12
HUNGER TDI 125*145*16
HUNGER TDI 130/150*16
HUNGER TDI 140/155*17
HUNGER TDI 360/390*20
HUNGER TDI 400*430*20
HUNGER TDI 600/640*25
HUNGER TDT 80/88*11,5
HUNGER TDT 80/90*11,5
HUNGER TDT 81/89*11,5
HUNGER TDT 85/93*11,5
HUNGER TDT 85/97*11,5
HUNGER TDT 86/94*11,5
HUNGER TDT 87/95*11,5
HUNGER TDT 90/98*11,5
HUNGER TDT 95/103*11,5
HUNGER TDT 96/104*11,5
HUNGER TDT 96/106*11,5
HUNGER TDT 97/105*11,5
HUNGER TDT 98/106*11,5
HUNGER TDT 100/108*11,5
HUNGER TDT 103/111*11,5
HUNGER TDT 105/113*11,5
HUNGER TDT 107/115*11,5
HUNGER TDT 108/116*11,5
HUNGER TDT 110/118*11,5
HUNGER TDT 113/121*11,5
HUNGER TDT 114/124*11,5
HUNGER TDT 115/123*11,5
HUNGER TDT 118/126*11,5
HUNGER AI 22/30*7
HUNGER AI 25/33*7
HUNGER AI 28/36*7
HUNGER AI 30/38*7
HUNGER AI 32/40*7
HUNGER AI 35/43*7
HUNGER AI 36/44*7
HUNGER AI 40/48*7
HUNGER AI 42/50*7
HUNGER AI 45/55*7
HUNGER AI 48/56*7
HUNGER AI 50/60*7
HUNGER AI 52/60*7
HUNGER AI 55/65*7
HUNGER AI 56/66*7
HUNGER AI 60/70*7
HUNGER AI 63/73*7
HUNGER AI 65/75*7
HUNGER AI 68/76*7
HUNGER AI 70/80*7
如果您需要完整的HUNGER的相關技術咨詢，請隨時致電愛澤工業（021-3100 6702），或者訪問網站jjxdch.cn,我們將盡全力解決您的問題。
If you have any question for HUNGER，please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：jjxdch.cn
