愛澤工業2018年4月部分到貨產品專題及庫存
——MR CHEMIE滲透劑、磁懸液、清潔劑篇
如下為我司愛澤工業IZE_Industries本月部分到貨MR CHEMIE相關產品，歡迎來電索取樣本資料和產品信息。
MR CHEMIE清潔劑、顯像劑、磁懸液 愛澤工業izeindustries到貨圖集
德國MR CHEMIE清潔劑MR85產品描述
General appearance and composition:
Mixture of solvents based on alcohol, method C according to EN ISO 3452-1
Dries slowly
Flash point material +13 °C
Suitable for all metals (suitability for plastics needs testing prior to use)
Processing temperature -10 to +50 °C
Aerosol can overhead sprayable
Relevant approvals and specifications
Sample testing acc. to EN ISO 3452-2 and ISO 3452-6
Low content of halogens and sulphur according to EN ISO 3452-2
and ASME Code V, Section V, Article 6
In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted
by Framatome ANP
Application:
Remove tinder, rust and other contaminations from surface in a suitable manner.
You can use MR85 Remover as precleaner for removal of oils or fats.Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding
or dipping. Allow to penetrate for at least 5 minutes.Remove excess MRPenetrant from surface using a clean lint-free cloth lightly
moistened with MR85 Remover.Spray MR? Developer (e.g. MR70) from a distance of approx. 20 cm on the dry
surface, achieving a thin, uniform layer. Depending on the used penetrant, surface
defects will appear as red or fluorescent indications. Please note: If the developer
layer is too thick tiny discontinuities will not appear through the developer.
Minimum shelf life:
Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
Aerosols, 500 ml (1 box contains 12 aerosols)
5 L, 30 L, 200 L
Valve pen (Piccolo-Pen)
MR CHEMIE清潔劑MR85愛澤工業izeindustries發貨照片
愛澤工業(IZE_INDUSTRIESMR CHEMIE)特價經銷、常用備件型號：
MR CHEMIE清潔劑MR79
MR CHEMIE清潔劑MR85
MR CHEMIE清潔劑MR88
MR CHEMIE清潔劑MR91
德國MR CHEMIE顯像劑MR70產品描述
General appearance and composition:
Solvent removable developer for red and fluorescent penetrant testingform d and e according to EN ISO 3452-1
Water mixable
Dries quickly
Processing temperature -30 °C to +50 °C
Aerosol overhead sprayable
Relevant approvals and specifications
Sample testing acc. to EN ISO 3452-2 and EN ISO 3452-6
Low content of halogens and sulphur according to EN ISO 3452-2and ASME Code V, Section V, Article 6
In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas,admitted by Framatome ANP
Produits et Matériaux Utilisables en Centrales (PMUC)
TLV 9017 01:2011-01
Application:
Remove tinder, rust and other contaminations from surface in a suitable manner. A
possible precleaner for removal of oils or fats is e.g. our remover MR? 79.
Apply MR?Penetrant to the part to be tested either by spraying, brushing, flooding
or dipping. Allow to penetrate for at least 5 minutes.
Remove excess MR?Penetrant from surface either using water or a clean lint-free
cloth lightly moistened with an MR? Remover.
Spray MR? 70 Developer from a distance of approx. 20 cm on the dry surface,
achieving a thin, uniform layer. Depending on the used penetrant, surface defects
will appear as red or fluorescent indications. Please note: If the developer layer istoo thick tiny discontinuities will not appear through the developer.
When using a spray gun connected to compressed air it must be ensured that the
supplied air is free of water and fat.
Minimum shelf life:
Will keep for a minimum of 4 years, stored at room temperature
Pack sizes:
Aerosols, 500 ml (1 box contains 12 aerosols)
5 L, 30 L
Valve pen
MR CHEMIE顯像劑MR70愛澤工業izeindustries發貨照片
愛澤工業(IZE_INDUSTRIESMR CHEMIE)特價經銷、常用備件型號：
MR CHEMIE顯像劑MR70
MR CHEMIE顯像劑MR81
MR CHEMIE顯像劑MR703W
MR CHEMIE顯像劑MR703WK
MR CHEMIE磁懸液MR76S composition:
Mixture of isoparaffinic carbonhydroxides, additives and pigments
Serves to indicate cracks when performing coloured magnetic particle inspection
Medium particle size da = 1-3 μm
Flashpoint 84°C
Sediment: 0,4 – 0,8 ml/100 ml (1 h)
Low odour
Aerosol cans over head sprayable
MR CHEMIE磁懸液MR76S的組成:
異鏈烷烴碳?xì)浠衔铮砑觿┖皖伭系幕旌衔?/p>
用于在進行彩色磁粉檢查時表示裂紋
中等粒徑：da = 1-3 μm
閃點84°C
沉淀物：0.4?0.8ml / 100ml（1小時）
低氣味
氣溶膠罐頭可噴霧
MR CHEMIE磁懸液MR76S愛澤工業izeindustries發貨照片
愛澤工業(IZE INDUSTRIES)特價經銷、常用備件型號：
MR CHEMIE滲透劑MR?67
MR CHEMIE滲透劑MR?67DL
MR CHEMIE滲透劑MR?67PS
MR CHEMIE滲透劑MR?68NF
MR CHEMIE滲透劑MR?68H
MR CHEMIE滲透劑MR?68C
MR CHEMIE滲透劑MR?312
MR CHEMIE滲透劑MR?311-R
MR CHEMIE滲透劑MR?313
MR CHEMIE滲透劑MR?313DL
MR CHEMIE滲透劑MR?699FA
MR CHEMIE滲透劑MR?660
MR CHEMIE滲透劑MR?670F
MR CHEMIE滲透劑MR?671F
MR CHEMIE滲透劑MR?672F
MR CHEMIE滲透劑MR?673F
MR CHEMIE滲透劑MR?70
MR CHEMIE滲透劑MR?70H
MR CHEMIE滲透劑MR?81T-R
MR CHEMIE滲透劑MR?703W
MR CHEMIE滲透劑MR?703WK
MR CHEMIE滲透劑MR?79
MR CHEMIE滲透劑MR?85
MR CHEMIE滲透劑MR?88
MR CHEMIE滲透劑MR?91H
MR CHEMIE滲透劑MR?3001
MR CHEMIE滲透劑MR?3002
MR CHEMIE清潔劑、顯像劑、磁懸液 愛澤工業izeindustries到貨圖集
以上為本月部分到貨MR CHEMIE產品，愛澤工業專業提供MR CHEMIE全系列產品，MR CHEMIE清潔劑MR85，MR CHEMIE顯像劑MR70，MR CHEMIE磁懸液MR76S等等。
如果您有任何關于產品的相關疑問，請隨時與我們聯系，愛澤工業(021-3100 6702)。我們將盡全力解決您的問題。
If you have any question for MR CHEMIE, please feel free to dial 0086-21-3100 6702 or browse our website: jjxdch.cn.
IZE-industries
Contact Information：
Tel：0086-21-31006702 or 0086-21-35350722
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：jjxdch.cn
上一篇：愛澤工業2018年4月部分到貨產品專題及庫存——VEM電機篇
下一篇：愛澤工業2018年4月部分到貨產品專題及庫存——ZIEHL-ABEGG風機篇
