HEINZ減速箱尺寸參數及特點介紹
HEINZ的凸輪分度裝置被廣泛用于需要精準增量運動的場合，例如自動裝配機械、包裝機械、醫藥機械、焊接產線、沖壓自動化及夾具等。
HEINZ的凸輪分度器有以下的優勢：
? 高頻率，可超每分鐘1200個分度，最高可達2000分度；
? 強化的凸輪及優秀的運動曲線使起停動作溫和；
? 主動定位，無需額外的定位元件，無回程間隙；
? 極高的可靠性，可多年無故障運行；
? 可雙向旋轉運行；
? 嚴謹?shù)脑O(shè)計保證了極高的定位精度，轉盤越大，定位越精確；
? 除H(T)SG63(鋁制)外，所有分度器外殼由鑄鐵制造，這保證了在高溫高轉速情況下運動軌跡的精確性。
HEINZ減速箱尺寸參數
HSP 40系列
HEINZ減速箱HSP40系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 15 mm |
Max. output shaft diameter (without collar) 15 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
|
HSP 63系列
HEINZ減速箱HSP63系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 25 mm |
Max. output shaft diameter (without collar) 25 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
|
HSP 80系列
HEINZ減速箱HSP80系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 30 mm |
Max. output shaft diameter (without collar) 30 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice |
|
|
|
HSP 100系列
HEINZ減速箱HSP100系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 35 mm |
Max. output shaft diameter (without collar) 35 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
|
HSP 125系列
HEINZ減速箱HSP125系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 45 mm |
Max. output shaft diameter (without collar) 45 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
|
HSP 160系列
HEINZ減速箱HSP160系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 55mm |
Max. output shaft diameter (without collar) 55 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
|
HSP 200系列
HEINZ減速箱HSP200系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 75mm |
Max. output shaft diameter (without collar) 75 mm |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
|
HSP 250系列
HEINZ減速箱HSP250系列 上海愛澤工業設備有限公司 |
Max. input shaft diameter (without collar) 120mm |
Output shaft available as hollow shaft |
Shaft position shown in mid dwell (zero of cam) |
Shafts available without keyway (no extra charge) |
Key dimensions according to DIN 6885 |
All tolerances according to DIN 7168m, unless otherwise stated |
Shaft end with tapped centre hole according to DIN 332/2 |
Dimensions and drawings are subject to change without prior notice! |
|
|
Heinz M-882-AG 愛澤工業
愛澤工業(IZE INDUSTRIES)特價經銷、常用備件型號：
HEINZ齒輪箱HSP80-2-180-M530
HEINZ齒輪箱HSP63-6-75/75-MS BWD 30
HEINZ齒輪箱HTSG140M
HEINZ齒輪箱HTSG140M-12-H100-270-XX-XX-XX
HEINZ齒輪箱HSG108M-6/2-H125-300-XX-XX
HEINZ齒輪箱HSG133-12-H100-90-XX-XX
HEINZ齒輪箱HT1500-8/4-H175-330-MS33
HEINZ齒輪箱HTT100-8/4-H100-330-MS330-XX
如果您有任何關于產品的相關技術咨詢或者需要產品的相關技術資料與文檔，請隨時聯系愛澤工業（86-21-3535 0722），或者訪問網站jjxdch.cn,我們將盡全力解決您的問題。
