KUKKO使用拉拔器的技巧及建議（中英文）
外部提取的技巧 / The tips for external extraction
由于每個拉拔過程都獨一無二，因此選擇合適的拉拔器是非常重要的。正確處理和正確使用也很重要。
Since no two stripping processes are alike, the choice of the right stripper is a very decisive factor. Correct handling and proper use are also important.
以下是一些專業技巧 / Here are some pro tips!
1. 光滑表面涂油 / Oil the sliding surfaces
進行一般拆卸時，建議在部件被拆卸時經過的光滑表面上涂油。這樣可以確保待拆卸部件底部的摩擦阻力更小。
For an easy pull-off process, it is recommended to oil the sliding surfaces over which the component is pulled off. This ensures that the frictional resistance at the set of the component to be extracted is minimized.
2.潤滑主軸 / Grease the spindle
潤滑主軸有助于確保主軸穿過拉鉤支架時運行更順暢。使用專用油潤滑主軸，還有防腐蝕的功效。
Greasing the spindle will help the crosshead spindle guide run smoother. The use of spindle grease also prevents possible corrosion.
3.正確定位拉拔器 / Apply puller correctly
拉鉤的支撐面須完全筆直地定位在要拉拔的零件下方。針對中心軸，拉拔器須始終位于中心位置。
The contact surfaces of the puller hooks must sit completely and straight under the part to be pulled off. In the case of central shafts, the puller must always be positioned centrally.
4.使用可互換壓片 / Use exchangeable pressure pieces
配備可互換尖端的壓力主軸完美適配的可互換壓片。這樣搭配可以使主軸適應的各種用途。
The exchangeable pressure pads are an optimal supplement for pressure spindles with exchangeable tips. By combining them, various application possibilities arise for individual adaptation on the shaft.
5.合理使用配件 / Use accessories sensibly
提供合適的配件，使拉拔器適應拉拔過程中的各種情況。無論是加長桿、夾具還是液壓主軸。
We supply the appropriate accessories to adapt the puller to any situation during external pull-off. Whether extensions, clamps or hydraulic spindles.
內部提取的建議 / The tips for internal extraction
由于滾珠軸承和軸套安裝在一個凹槽中，無法隨意地從外部進行拆裝，對它們進行內提取時就要用到內拉馬。為了能夠使用內拉馬抓住軸承，就需要使用一個支架或者一個滑錘。
對于非破壞性地拉拔出殼體中安裝在軸上的滾珠軸承，需要使用滾珠軸承專用拉馬。
Internal extractors are used for the internal extraction of ball bearings and bushings which are not freely accessible from the outside because they are located in a recess. In order to be able to grip a bearing with an internal extractor, a counter support or a slide hammer is always required.
Special pullers for ball bearings are required for the non-destructive extraction of ball bearings which are located in a housing and on a shaft.
下面是一些專業建議 /Here are some pro tips!
1. 正確定位內拉馬 / apply the internal extractor correctly
進行內提取時，拉馬必須始終伸到待拉拔的部件下方。使用支架時，要確保支架臂沒有位于待拉拔的部件上。
During internal extraction, the extractor must always reach under the part to be extracted. When using a counter support, make sure that the arms are not standing on the part to be extracted.
2. 安裝延長桿 / use extensions
借助延長桿可以加大內拉馬的夾緊深度，從而也能夠無損傷地拆卸位于軸套內更深處的部件。
An extension can be used to extend the internal extractors of the internal extractors can be extended with the aid of an extension so that parts located deeper in the bushing can also be dismantled non-destructively.
3. 使用螺紋適配器 / use thread adapters
螺紋適配器可以與滑錘或者支架組合使用。當待拉拔的部件中擰入有螺紋銷時，適配器承擔著內拉馬的功能。
In combination with a slide hammer or a counter support, the thread adapters can be used. The adapters take over the function of an internal extractor when the threaded pins are screwed into the part to be extracted.
4. 滑錘和支架 / slide hammer vs. counter support
當軸承的內圈已經被內拉馬牢牢地抓住時，就可以利用良好的夾緊效果將其快速拉出。為此可以使用一個滑錘或者一個支架?；N的優點是，它可以在狹窄的空間內、不使用支撐的情況下拉出，而使用支架則可以借助更大的力量、更加精確地完成工作。
Once the inner ring of the bearing has been securely gripped by the internal extractor, it can be quickly extracted by means of a good clamping action. Either a slide hammer or a counter support can be used for this purpose. The advantage of the slide hammer is that it can be extracted in a very confined space without the need for supports, whereas a counter-support is more precise and requires more force.
5. 使用分段內拉馬 / Use segment internal extractor
對水平的軸承、軸承外圈以及軸套進行內提取時，建議使用分段內拉馬。即使待拉拔的組件下方只有很小的空間，超窄的抓握邊緣也可以輕松完成拆卸。
For internal extraction of flat bearings, bearing outer rings and bushings, we recommend using segment internal extractors. The extra narrow gripping edges allow dismounting even if there is little space under the component to be extracted.
單純利用肌肉力量完成內提取 – 內拉馬和滑錘的組合。
Internal extraction with pure muscle power - combination of internal extractor and slide hammer.
聲明：
- 文章轉載自網絡，由愛澤工業翻譯，如有侵權，請聯系刪除！
- 如有偏頗，歡迎指正！
